Magnetic drilling machine A10 210 - 211 Magnetic drilling machine RU25 212 - 213 Magnetic drilling machine RU40 214 - 215 Overview of RUKO core drilling machines 216 - 217 Arbor holder for core drills with Weldon shank 218 Arbor holder with EasyLock Quick IN arbor for core drills with Weldon shank 218 Arbor holder for thread taps 219 Quick-acting arbor holder for quick-change inserts 219 Quick-change insert with safety coupling for through and blind holes 219 Overview of thread tap shaft diameters 219 Adapter, drill chuck and accessories for core drilling machines 220 Magnetic chip lifter 220

RUKO Magnetic drilling machine Drilling depth Type and applications overview

Main application (^) Other application RUKO 189

Solid drills with Weldon shank (3/4") Can be used in all pillar and magnetic drilling machines with Morse taper in conjunction with RUKO holders no. 108 302-1, 108 303-1, 108 315, 108 316, RUKO EasyLock no. 108 312-1, 108 313-1, 108 314 or with direct Weldon shank holders such as RUKO magnetic drilling machine A10. • Slide the solid drill bit into the holder and tighten the hexagon socket screws. • Ensure that the "Solid 3S" solid drill bit is seated properly in the holder. • With the EasyLock quick-release holder, the solid drill bit is automatically locked in place. • Drill to size immediately,...

Further development of the cutting edge geometry Further development of the cutting edge geometry has resulted in significantly improved cutting behaviour, which has a positive effect on cutting performance and tool life. 1. Optimised cutting edge geometry for increased cutting performance and reduced cutting forces. 2. The rake angles are designed for universal use in various types of steel. 3. Improved chip evacuation thanks to U-shaped relief. The special geometry of the chip evacuation reduces the thermal load on the HSS core drill, as the heat generated during machining is largely dissipated...

Solid drill "Solid 3S" with Weldon shank (3/4"), CBN ground and 3 cutting edges, 30.0 mm The spiral-fluted 3-flute geometry ensures extremely high stability of the solid drill bit "Solid 3S" and thus prevents the risk of breakage of the cutting edges due to overstressing or jamming of the chips. The high stability significantly increases the service life of the "Solid 3S". This reduces operating costs. The "Solid 3S" enables precise spot drilling without centre punching and scribing. The solid drill bit is easier to regrind than core drills of the same diameter. Packaging: plastic tube The risk...

Core drill HSS and HSSE-Co 5 with Weldon shank (3/4"), 55.0 mm ll 108 305 (not included in delivery) Ejector pin: Item no. 108 305 (0 6.35 x 102.0 mm) Packaging: plastic tube

Core drills HSS and HSSE-Co 5 with Weldon shank (3/4"), 30.0 mm Ejector pin: Item no. 108 304 (0 6.35 x 77.0 mm) Packaging: plastic tube

+ 1 cutting paste 40 ml | Item no. 101 021 + 1 ejector pin 0 6.35 x 77.0 mm | Item no. 108 304

HSS core drill with Weldon shank (3/4"), 110.0 mm - extra long Ejector pin: Item no. 108 2000 (0 8.0 x 155.0 mm) Packaging: plastic tube Move core drill out of the hole, remove the chips in the borehole. Repeat this procedure several times. Reduces the risk of breakage and increases the service life of the core drill.

Ejector pin: Item no. 108 306 (0 6.35 x 87.0 mm) Machine no.: with Quick IN-adapter Packaging: plastic tube HSSE-Co 5 10 Core drill set + 1 cutting paste 40 ml | Item no. 101 021 + 1 ejector pin 0 6.35 x 87.0 mm | Item no. 108 306

Core drill with tungsten carbide cutting edges and Weldon shank (3/4"), 50.0 mm Suitable for Hardox / Weldox 400 steel Ejector pin: 0 12.0 up to 0 17.0 mm | Item no. 108 305 (0 6.35 x 102.0 mm) 0 18.0 up to 0 50.0 mm | Item no. 108 701 (0 8.0 x 112.0 mm) Packaging: plastic tube

Core drill with tungsten carbide cutting edges and Quick IN shank, 50.0 mm With fixed shaft. Machine no.: with Quick IN-adapter Packaging: plastic tube 08 High performance cutting oil spray RUKO coolants and lubricants have an excellent release and cooling effect. They produce a high surface quality and increase tool life even with hard and brittle materials. hard and brittle materials.

Including Quick IN shank adapter, item no. 108 111 Machine: with Quick IN system holder Packaging: plastic tube

Core drill with carbide cutting edges and threaded retainer, 50.0 mm Ejector pin: Item no. 108 110 (0 6,35 x 123,0 mm) Adapter: thread M18 x 6 P1,5 Packaging: plastic tube

Can be used on all track drilling machines. The cutting geometry has been specially optimized for heavy duty chip removal from railway tracks, thus makes efficient use possible. Packaging: plastic tube

Packaging: plastic tube Centring: Position the ejector pin in the centre of the centre punch. The machine is now in the correct drilling position. Please switch on the magnet now. The cutting oil is discharged via the ejector pin by means of the automatic internal lubrication system and delivered to the cutting edges in optimum doses. In the final phase of drilling, the drill core is pressed out of the drill hole by the spring-loaded ejector pin.

Pure power – to make every breakthrough a success

■ Height-adjustable power unit with double dovetail guide ■ Very light and easy to use ■ Automatic coolant supply ■ Easy readjustment thanks to 50 % reduction in magnetic power when the motor is switched off H Magnetic clamping force: 10.000 N Total Power consumption: Core drills: Core drilling machine A10 in tool case ♦

Drill chuck Item no. 108 116 threaded retainer

RU25Magnetic drilling machine RU25 The versatile ■ Height-adjustable power unit with double dovetail guide Magnetic clamping force: 16.000 N Total Power consumption: 1.200 Watt Core drills: Core drilling machine RU25 in tool case 1 Allen key 2.5 / 6 1 safety belt 1 drill chuck 0 1.0 - 16.0 mm 1 holder with MK 2 holder 1 coolant bottle 1 chip hook 1 High-performance cutting oil spray 1 Operating instructions