Synthetic Gear Grease A fully synthetic, PAO based very high dutied lubrication grease for high loaded gear boxes, bearings, and chains. Besides a good temperature stability it guarantees excellent wear protection and good lubrication for a long life time. It is suitable for many types of gear boxes including worm gears, many bearings, slideways and sliding surfaces. Based on modern Polyalfaolefines (PAO) it is also food grade and has in this application better lubrication and oxidation properties than greases based on pharmaceutical white oils or hydrocracks. In worm gears and other applications the seal agressive polyglycols may be replaced. * good anticorrosive properties * very good tackiness * suitable for centralized lubrication systems * good oxidation resistance * food grade - all components conform to USDA H1 or the FDA regulations for Lubricants in incidental food contact * very good water resistance * contains high viscosity base fluid * low working temperature caused by low friction * good pumpability in many types of lubrication systems even at low temperatures * for gear boxes in food industry * for gears and bearings in flight safety equipment, control dvices in aeronautics * for industrial gears and thread spindles running slowly but loaded heavy * for chains, drive and transport chains, in conveying machines, pasteurize plants, sorting stations, peelers, packing and labelling machines, shrinking tunnels Technical Datas Color beige Consistency Class NLGI 00 Viscosity Base Fluid, 40°C mm2/s 600 Water Resistance Static Grade 1-90 Corrosion Protection Kupfer 1-100 Flow pressure -30°C hPa (mbar) 80 The indicated service temperatures are guide values depending on the lubricants composition and on the application. They may vary in case of special influences or ongoing use. For further information, please see our website www.molyduval.com or consult your local representative. The content of this manual is based on our current knowledge and experience in the development and manufacture of lubricants. Because of the complexity of tribological systems, the effect of our products depends on many parameters, which we cannot assess and which influence we cannot evaluate. For this reason general statements about the function of our products are not possible. The information in this manual, therefore, contains non-binding guidelines, which should give the technical trained reader information on possible applications. The information in this manual does not include property assurances or warranties or guarantees to the properties or suitability of this product in a specific application. Prior to its use it is absolutely necessary to test this product in the application to ensure that the product and its use is safe, economical and fully suitable. It should proceed with due diligence. We reserve the right to change the information in this manual at any time and without notice. We reserve the right to change the information in this manual at any time and without notice. All previous versions of this manual are no longer valid. Updating : 30.03.2012

NSF International / Nonfood Compounds Registration Program MOLYDUVAL VAN LAAR GMBH Dear Mr. Thomas Hanemann: NSF lias processed the application for Registration of MOLYDUVAL® Prometheus A 00 LP to the NSF Registration Guidelines for Proprietary Substances and Nonfood Compounds (2004), which are available at http://www.nsf.org. The NSF Nonfood Compounds Registration Program is a continuation of the USDA product approval and listing program, which is based on meeting regulatory requirements including FDA 21 CFR for appropriate use, ingredient and labeling. This product is acceptable as a lubricant...