BP Energol GR-XP Range Industrial Extreme Pressure Gear Oil Description The BP Energol™ GR-XP gear oil range of high quality lubricants are based upon highly refined mineral oil, enhanced with sulphur/phosphorus extreme pressure additive technology providing outstanding thermal stability and high load carrying capacity. The advanced extreme pressure additive system not only provides high load carrying capacity, but was designed to provide microscopic wear protection. Microscopic wear protection, also known as micropitting protection, is critical in preventing destructive wear at the micro level therefore extending gear life and meeting the evolving demands of smaller and higher output gear boxes Application The Energol GR-XP range is recommended for the lubrication of industrial gearboxes using forced circulation or splash and oil bath lubrication. They may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications. They have very good viscosity characteristics to ensure that starting torques are not excessively high in cold operating conditions. The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units. The Energol GR-XP range is fully compatible with nitrile, silicone and fluropolymer seal materials. Energol GR-XP is classified as follows: DIN Classification is CLP Energol GR-XP grades meet the requirements of: DIN 51517 Part 3 AGMA 9005 - D94 US Steel 224 David Brown Type E Hansen Transmissions Flender Advantages • ‘Clean gear’ additive technology ensures low deposit formation and enhanced filter life. • Full Extreme Pressure (EP) performance* gives maximum protection of gears against wear and shock-loading. • Good water separation and demulsification characteristics means reduced down time through prolonged lubricant life and increased equipment reliability. • Excellent protection against corrosion and wear results in less maintenance. • Suitable for Müller Weingarten equipment * ISO 220 grade achieved FZG >14 rating under A16.6/90 (double speed) test conditions

Typical Characteristics Subject to usual manufacturing tolerances. BP, Energol GR-XP, and the BP logo are trademarks of BP p.l.c, used under licence This data sheet and the information it contains is believed to be accurate as of the date of printing. However, no warranty or representation, express or implied, is made as to its accuracy or completeness. Data provided is based on standard tests under laboratory conditions and is given as a guide only. Users are advised to ensure that they refer to the latest version of this data sheet. It is the responsibility of the user to evaluate and use products...