RUDOLF UHLEN  Rudolf Uhlen GmbH - Am Höfgen 13 - 42781 Haan Rudolf Uhlen GmbH Am Höfgen 13 42781 Haan 3. This declaration of conformity is issued under the sole responsibility of the manufacturer: Rudolf Uhlen GmbH. 4. Object of the declaration: Headgear with forehead guard 5. The object of the declaration described in point 4 is in conformity with the relevant Union harmonisation legislation: guideline 2001/95/EG and regulation (EU) 2016/425. 6. References to the relevant harmonised standards used, including the date of the standard, or references to the other technical specifications, including the date of the specification, in relation to which conformity is declared: EN 166:2001. 7. The notified body DIN CERTCO Gesellschaft für Konformitätsbewertung mbH Alboinstr. 56, 12103 Berlin (0196) performed the EU type-examination (Module B) and issued the EU type-examination certificate C1878UHL/R5. 9. Additional information: Signed for and on behalf of: Rudolf Uhlen GmbH Steffen Fiedler -General manager- Geschäftsführer: Volker Fiedler Steffen Fiedler Handelsregisternr.: HRB 17088 Registergericht: Wuppertal

For gold-coated face shields of Rudolf Uhlen applies: The visor is made of polycarbonate. This plastic starts melting at a temperature of 150°C. Although the gold-coating reflects a major part of the radiant heat, this melting temperature will eventually be reached, dependent on the temperature of the heat source as well as the time in front of and the distance to the heat source. At this point at the latest, the operations should be stopped to maintain the full functioning of the face shield. Warning! The safety officer should be contacted to ensure an adequate protection at work. Plastic can...

Description Headgear with forehead guard ■ The headgear is a face protection device that can be attached to the head without a hard hat. ■ It consists of a headgear and a forehead guard to which the face shield is attached. The head gear is adjusted by means of a turning knob. It fits head widths between 50 – 60cm. The face shields are attached with an eccentric knob to the forehead guard. The forehead guard can be lifted and locked with two screw heads. Face shield The face shields fit both the Rudolf Uhlen headgear as well as the Rudolf Uhlen visor carriers. The face shields can be produced...

RUDOLF UHLEN  Rudolf Uhlen GmbH - Am Höfgen 13 - 42781 Haan Rudolf Uhlen GmbH Am Höfgen 13 42781 Haan 3. This declaration of conformity is issued under the sole responsibility of the manufacturer: Rudolf Uhlen GmbH. 4. Object of the declaration: Headgear with forehead guard 5. The object of the declaration described in point 4 is in conformity with the relevant Union harmonisation legislation: guideline 2001/95/EG and regulation (EU) 2016/425. 6. References to the relevant harmonised standards used, including the date of the standard, or references to the other technical specifications, including...