RUDOLF UHLEN 42781 Haan - Am Höfgen 13 www.aschua-uhlen.de Telefon (02129) 1444 Telefax (02129) 59980 [email protected]  Technical Datasheet for Personal Protective Equipment: Mesh visor 500x300mm Articleno.: BFKHI002-1 Description: Mesh-visor made of wire-cloth, 500x250mm, with beaded edging CE-Certificate: C5767UHL/R3 Technical features Weight: 154g  Heat shield made of galvanized wire cloth  the heat shield is attached to a visor carrier Used materials: Wire cloth: Eylets reflects radiant heat to avoid reflections the inside is blackened galvanized iron, W 0,51 D 0,24 iron Fields of use:  Heavy industry: esp. steel industry, foundries, chemical plants Marking: Geschäftsführer: Volker Fiedler Steffen Fiedler Handelsregisternr.: HRB 17088 Registergericht Wuppertal UHL 1731 S CE on the front, upper right side

If the eye-protection device is composed of two different devices, only the protection of the device with the lower protection class is given. Notice relating to the mutual compability of the marking (DIN EN 166 note d, e and f in table 12). If protection against mechanical impacts with high velocity in extreme temperatures is needed, the used eye protection device has to be marked with the letter T after the letter for the impact protection, i.e. BT. Otherwise the eye protection device can only be used against impacts with high velocity in room temperature. User manual Aluminium-visor carrier...

Aluminium-visor carrier ■ The visor carrier is the link between the hard hat and the safety visor. ■ ■ It is made out of high quality aluminium. Due to a powerful tension spring the visor carrier has a secure fit on the hard hat. Mesh visor with Aluwindow 60x120mm In the window fit amongst others inspection glasses and PC-visors with the dimensions 60x120mm. The mesh visors are attached with a rotating fastener or with a clip fastener. A cover between visor carrier and mesh visor protects against flying particles. The lenses are securely clamped in the frame by two steel springs. The mesh visors...

RUDOLF UHLEN  Rudolf Uhlen GmbH - Am Höfgen 13 - 42781 Haan Rudolf Uhlen GmbH Am Höfgen 13 42781 Haan 3. This declaration of conformity is issued under the sole responsibility of the manufacturer: Rudolf Uhlen GmbH. 4. Object of the declaration: Mesh-visor made of wire-cloth, 500x250mm, with beaded edging 5. The object of the declaration described in point 4 is in conformity with the relevant Union harmonisation legislation: guideline 2001/95/EG and regulation (EU) 2016/425. 6. The notified body DIN CERTCO Gesellschaft für Konformitätsbewertung mbH Alboinstr. 56, 12103 Berlin (0196) performed...