RUDOLF UHLEN 42781 Haan - Am Höfgen 13 42761 Haan - Postfach 1722 www.aschua-uhlen.de Technical Datasheet for Personal Protective Equipment: Visor made of Polycarbonate with PVC-bib Articleno.: GFKVI002-5 Description: Visor made of Polycarbonate, clear, 500x200x1mm with PVC-bib for mounting on universal visor carrier CE-Certificate: C1233UHL/R9 Technical features Weight: 160g  Visor made of high-quality Polycarbonate  high notched bar strength  high temperature resistance from ca.  good UV-protection 50°C up to +135°C  additional protection of neck and chest  excellent optical quality (optical class 1) area due to the large PVC-bib Used materials: Visor: Eyelets: Bib: Polycarbonate 1mm Iron nickel-plated PVC, 0,25mm Fields of use:  heavy industry: esp. steel industry, foundries, chemical plants Marking: Geschäftsführer: Volker Fiedler Steffen Fiedler Handelsregisternr.: HRB 17088 Registergericht Wuppertal protection against mechanical impact grinding works UHL 1 BT 9 CE on the front of the visor, upper right side

Warning! The safety officer should be contacted to ensure an adequate protection at work. Plastic can cause an allergic reaction of the skin of sensitive persons. Eye-protection devices against particles with high velocity could transmit the impact energy, if the device is worn together with standard glasses. If the eye-protection device is composed of two different devices, only the protection of the device with the lower protection class is given. Notice relating to the mutual compability of the marking (DIN EN 166 note d, e and f in table 12). If protection against mechanical impacts with...

Description Aluminium-visor carrier ■ The visor carrier is the link between the hard hat and the safety visor. Manual ■ To attach the visor carrier to the hard hat, the Uprofile of the carrier is slid on the brim of the hard hat. It is made out of high quality aluminium. Due to a powerful tension spring the visor carrier has a secure fit on the hard hat. ■ The universal-visor carrier fits all standard hard hats. Different models can be manufactured for special hard hat shapes The face shields are attached with a rotating fastener or with a clip fastener. The face shields can be lifted into 4...

RUDOLF UHLEN  Rudolf Uhlen GmbH - Am Höfgen 13 - 42781 Haan Rudolf Uhlen GmbH Am Höfgen 13 42781 Haan 3. This declaration of conformity is issued under the sole responsibility of the manufacturer: Rudolf Uhlen GmbH. 4. Object of the declaration: Visor made of PC, transparent, 500x250x1mm, PVC-extension 5. The object of the declaration described in point 4 is in conformity with the relevant Union harmonisation legislation: guideline 2001/95/EG and regulation (EU) 2016/425. 6. References to the relevant harmonised standards used, including the date of the standard, or references to the other...