Datasheet Alu-Visor Carrier for broat helmet

Product catalog summary

Technical Datasheet Summary

Product Description:
The Aluminium Visor Carrier (Article No. GFKHH005-2) is designed for mounting on broad helmets in an elongated format. It is made from high-quality aluminium and features a 4-level joint for secure positioning. The carrier provides high sealing from above due to a wide overlap of profiles when flapped down and uses a rotary latch for visor fixation. It is attached to helmets using a robust steel spring.

Technical Features:

Weight: 135g
Materials: Aluminium profiles, strip steel C75S, spring steel X12 Chrome-Nickel, soft-PVC

Fields of Use:
Suitable for heavy industry, steel industry, foundries, chemical plants, fire brigade, and civil protection.

Warnings:

Consult a safety officer to ensure adequate protection.
Plastic components may cause allergic reactions in sensitive individuals.
Eye protection devices may transmit impact energy if worn with standard glasses.
Protection is limited to the device with the lower protection class when using combined devices.

Marking and Standards:
Marked as UHL 166 BT CE, conforming to EN 166, EN 167, EN 168, and EN 170 standards.

User Manual Summary

Installation and Use:

The visor carrier is attached to the hard hat by sliding the U-profile onto the brim and securing it with a tension spring.
Face shields are attached using a rotary or clip fastener and can be adjusted to four positions.

Maintenance and Storage:

Store in dry rooms away from intense solar radiation.
Clean with water, standard detergents, and mild disinfectants. Dry face shields with compressed air to avoid scratches.
Regularly check the attachment, fit, and folding mechanism of the visor carrier and face shield.

Replacement and Repairs:

Replace thermoplastic components every three years due to environmental impacts.
Use only original manufacturer parts for repairs.

EU Declaration of Conformity:
The product conforms to EU guidelines 2001/95/EG and regulation (EU) 2016/425, with certification by DIN CERTCO (Notified Body No. 0196).

Catalog excerpts

Datasheet Alu-Visor Carrier for broat helmet-1

RUDOLF UHLEN 42781 Haan - Am Höfgen 13 www.aschua-uhlen.de Telefon (02129) 1444 Telefax (02129) 59980 [email protected]  Technical datasheet for Personal Protective Equipment: Aluminium-Visor Carrier Artikelno.: GFKHH005-2 EN Norms: EN 166 Description: Aluminium visor carrier for mounting on broad helmets , elongated format CE-Certificate: C0844UHL/R6 Technical features Weight: 135g  Visor carrier made of high-quality alumin 4-level-joint ium  high sealing from above, due to a wide  Fixation of the safety visor with rotary overlap of the profiles, when flapped latch down  the visor carrier is fixed on the helmet by a robust steel spring Used materials: Profiles: Raster: Tension spring: Tube: Aluminium Strip steel C75S, hardened and zinced Spring steel X12 Chrome-Nickel 17.7K stainless Soft-PVC Fields of use:  Heavy industry: esp. steel industry, foundries, chemical plants Marking: Geschäftsführer: Volker Fiedler Steffen Fiedler Handelsregisternr.: HRB 17088 Registergericht Wuppertal fire brigade, civil protection

Open the catalog to page 1

Datasheet Alu-Visor Carrier for broat helmet-2

Warning! The safety officer should be contacted to ensure an adequate protection at work. Plastic can cause an allergic reaction of the skin of sensitive persons. Eye-protection devices against particles with high velocity could transmit the impact energy, if the device is worn together with standard glasses. If the eye-protection device is composed of two different devices, only the protection of the device with the lower protection class is given. Notice relating to the mutual compability of the marking (DIN EN 166 note d, e and f in table 12). If protection against mechanical impacts with...

Open the catalog to page 2

Datasheet Alu-Visor Carrier for broat helmet-3

Description Aluminium-visor carrier ■ The visor carrier is the link between the hard hat and the safety visor. Manual ■ To attach the visor carrier to the hard hat, the Uprofile of the carrier is slid on the brim of the hard hat. It is made out of high quality aluminium. Due to a powerful tension spring the visor carrier has a secure fit on the hard hat. ■ The universal-visor carrier fits all standard hard hats. Different models can be manufactured for special hard hat shapes The face shields are attached with a rotating fastener or with a clip fastener. The face shields can be lifted into 4...

Open the catalog to page 3

Datasheet Alu-Visor Carrier for broat helmet-7

RUDOLF UHLEN Herstellung von Arbeitsschutzartikeln GmbH 42781 Haan - Am Höfgen 13  Rudolf Uhlen GmbH - Am Höfgen 13 - 42781 Haan Rudolf Uhlen GmbH Am Höfgen 13 42781 Haan 3. This declaration of conformity is issued under the sole responsibility of the manufacturer: Rudolf Uhlen GmbH. 4. Object of the declaration: Alu-Visor Carrier for broad helmet, elongated format 5. The object of the declaration described in point 4 is in conformity with the relevant Union harmonisation legislation: guideline 2001/95/EG and regulation (EU) 2016/425. 6. References to the relevant harmonised standards used,...

Open the catalog to page 7

Datasheet Alu-Visor Carrier for broat helmet

Datasheet Alu-Visor Carrier for broat helmet

Catalog excerpts

All Rudolf Uhlen GmbH catalogs and technical brochures