MOLYTROP® Haftblock 10035

MOLYTROP® Haftblock 10035

MOLYTROP® Haftblock 10035

Product catalog summary
Identification of the Substance/Mixture and Company:
The product, MOLYTROP® Haftblock 10035, is used for surface conditioning with a solid coating. Supplier: Rudolf Hirner, technische Produkte e.U.

Hazards Identification:
Not classified as hazardous under regulation (EC) No. 1272/2008. No other known hazards.

Composition/Information on Ingredients:
Polymerized solid of epoxy resin with inorganic lubricant powder. Contains Molybdenum disulphide and Quartz alveolar with specific exposure limits.

First Aid Measures:
Inhalation is unlikely. For skin contact, wash with soap and water. For eye contact, rinse with water for 10-15 minutes. Seek medical attention if ingested.

Firefighting Measures:
Use CO2, extinguishing powder, or water spray. Fire may produce toxic pyrolysis products.

Accidental Release Measures:
Restrict access, use personal protective equipment, and avoid environmental contamination.

Handling and Storage:
Ensure ventilation, avoid skin and eye contact, and store in a dry place at room temperature.

Exposure Controls/Personal Protection:
Use protective gloves and goggles, avoid inhaling dust, and maintain hygiene practices.

Physical and Chemical Properties:
Dark-grey, opaque solid with a low wax-like odor. Melting point ~450°C, slightly to insoluble in water.

Stability and Reactivity:
Stable under prescribed conditions. Avoid strong oxidizing agents, acids, and alkalis.

Toxicological Information:
No toxicological data available. Contains <0.5% quartz, not classified as carcinogenic under EU regulations.

Ecological Information:
No ecotoxicological data available. Should not enter water systems.

Disposal Considerations:
Dispose according to local regulations using authorized contractors.

Transport Information:
Not classified as a dangerous good for transport.

Regulatory Information:
Complies with REACH regulation (EC) No. 1907/2006 and CLP regulation (EC) 1272/2008.

Other Information:
Based on current knowledge, does not guarantee product properties. Handle with caution.
See more

Catalog excerpts

MOLYTROP® Haftblock 10035-1

Safety Data Sheet according to regulation (EC) No 1907/2006 (REACH) Trade name: MOLYTROP® Haftblock 10035 Print date: 22.03.2019 Revision date: 22.03.2019 Relevant identified uses of the substance or mixture and uses advised against Identified uses Surface conditioning by application of a solid coating Competent person Emergency telephone number Rudolf Hirner, technische Produkte e.U. Kleinreifling 24a A-4464 Weyer T, F: +43-7357-20812 Email: [email protected] Rudolf Hirner (CEO) Email: [email protected] +43-7357-20812 Available during office hours Mo-Fr 8 a.m. – 12 a.m. Please contact the regional poison center or emergency call. Austrian toxicity information center Vienna: +43 1 406 43 43 Available 24 hours Hazards identification Classification of the substance or mixture The mixture is not classified as hazardous in sense of the regulation (EC) No. 1272/2008. Label elements Safety data sheet available on request. Hazard components for labelling Not applicable. Other hazards None known. Identification of the substance/mixture and of the company/undertaking Product identifier Chemical characterization Polymerized solid of epoxy resin. Contains inorganic lubricant powder. Hazardous ingredients

 Open the catalog to page 1
MOLYTROP® Haftblock 10035-2

Safety Data Sheet according to regulation (EC) No 1907/2006 (REACH) Trade name: MOLYTROP® Haftblock 10035 Print date: 22.03.2019 Revision date: 22.03.2019 name Molybdenum disulphide** Quartz alveolar** Full text of Hazard statements and hazard categories: see section 16. Substance with an occupational exposure limit value (see section 8) Description of first aid measures Seek medical advice if symptoms occur. Never give anything by mouth to an unconscious person or a person with cramps. Change contaminated, saturated clothing. In case of inhalation In normal cases no exposure through this route....

 Open the catalog to page 2
MOLYTROP® Haftblock 10035-3

Safety Data Sheet according to regulation (EC) No 1907/2006 (REACH) Trade name: MOLYTROP® Haftblock 10035 Print date: 22.03.2019 Revision date: 22.03.2019 Fire may cause formation of COx, SOx’, toxic pyrolysis products. Special protective equipment: Wear a self-contained breathing apparatus and chemical protective clothing. Accidental release measures Personal precautions, protective equipment and emergency procedures Restricted access to contaminated areas, until cleaning work is finished. Wear personal protection equipment. Avoid contact with skin and eyes. Provide adequate ventilation. Attention:...

 Open the catalog to page 3
MOLYTROP® Haftblock 10035-4

Safety Data Sheet according to regulation (EC) No 1907/2006 (REACH) Trade name: MOLYTROP® Haftblock 10035 Print date: 22.03.2019 Revision date: 22.03.2019 If used as prescribed, exposure is unlikely. The substances are embedded in a polymer matrix. Observe the member state specific regulations. MAK (maximum workplace concentrations)-value (valid for A acc. to GKV 2018 Annex 1) name Molybdenum and unsoluble compounds (calculated as Mo) Quartz alveolar Daily average value Breathable fraction Alveolar fraction Short-time value instantaneous value Valid for Germany acc. to TRGA 900: The product does...

 Open the catalog to page 4
MOLYTROP® Haftblock 10035-5

Safety Data Sheet according to regulation (EC) No 1907/2006 (REACH) Trade name: MOLYTROP® Haftblock 10035 Print date: 22.03.2019 Revision date: 22.03.2019 Physical and chemical properties Information on basic physical and chemical properties Physical state / Appearance Colour Odour Odour threshold Dark-grey, opaque Low, wax-like Melting point/range Upper/lower explosive limits Boiling point/range Flash point Evaporation rate Vapour pressure (27 °C) Density (20 °C) Partition coefficient: n-octanol/water; Explosion properties Auto-ignition temperature Decomposition temperature Oxidising properties...

 Open the catalog to page 5
MOLYTROP® Haftblock 10035-6

Safety Data Sheet according to regulation (EC) No 1907/2006 (REACH) Trade name: MOLYTROP® Haftblock 10035 Print date: 22.03.2019 Revision date: 22.03.2019 None known. Incompatible materials Strong oxidizing agents, strong acids and alkalis Hazardous decomposition products No decomposition if used as prescribed. Toxicological information Information on toxicological effects Toxicological data for the product are not available. LD50 values of single components relevant for classification Molybdenum disulphide Acute toxicity Based on available data classification criteria are not fulfilled. ATEmix...

 Open the catalog to page 6
MOLYTROP® Haftblock 10035-7

Safety Data Sheet according to regulation (EC) No 1907/2006 (REACH) Trade name: MOLYTROP® Haftblock 10035 Print date: 22.03.2019 Revision date: 22.03.2019 Based on available data classification criteria are not fulfilled. Other information The product was classified on the basis of the calculation procedure of the CLP- Regulation (EC) 1272/2008. Ecological information Ecotoxicological data for the product are not available. The product was classified on the basis of the calculation procedure of the CLP- Regulation (EC) 1272/2008. Aquatic Toxicity of ingredients Molybdenum disulphide (CAS: 1317-33-5)...

 Open the catalog to page 7
MOLYTROP® Haftblock 10035-8

Safety Data Sheet according to regulation (EC) No 1907/2006 (REACH) Trade name: MOLYTROP® Haftblock 10035 Print date: 22.03.2019 Revision date: 22.03.2019 Recommendation: Completely emptied packages can be recycled by authorized contractors. Transport information No dangerous good in sense of the transport regulation for land, air and sea. (Acc. to ADR 2013) UN number UN proper shipping name Not applicable. Transport hazard class(es) Not applicable. Packing group Environmental hazards Not applicable. Special precautions for user Not applicable. Transport in bulk according to Annex II of MARPOL...

 Open the catalog to page 8
MOLYTROP® Haftblock 10035-9

Safety Data Sheet according to regulation (EC) No 1907/2006 (REACH) Trade name: MOLYTROP® Haftblock 10035 Print date: 22.03.2019 Revision date: 22.03.2019 Other information The information contained herein is based on the present state of our knowledge. It characterizes the product with regard to the appropriate safety precautions. It does not represent a guarantee of the properties of the product. All materials may present unknown hazards and should be used with caution and only for identified uses described in section 1. Although certain hazards are described herein, we cannot guarantee that...

 Open the catalog to page 9

All Rudolf Hirner, technsiche Produkte e-U. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.