Load ring ICE-LBG-SR 6,7t M30 Super Rotation® Artikel-Nr: 8504290 • SR-ball bearing is the optimal solution for permanent turning and flipping actions at WLL and without loosening the mounting bolt. • Captive but exchangeable RUD-Boltmade out of patented steel with special corrosion protection Corrud-DT. Clear marking at the bolt head: RUD, thread size, batch-no., class of strength. • Lifting point pivots 360°. Suspension ring pivots 180°. • Clear marking of the minimum WLL for all loading directions. Marking with requested torque moment and nominal WLL with a safety factor of 4:1 (MD 2006/42/EC) and 5:1 (ASME B 30.26) • Patented markings for easy determination for withdraw of service. • Clamping springworks as a noise reduction and holds the suspension ring in the requested position; therefore simple hinge of lifting mean possible respectivley flat design if turned down. • Available as: - Standard Metric Thread (DIN EN 13) - Variable bolt lengths available for tapped or through holes. • Significant product characteristics of the ICE-LBG-SR are subject to property right claims. • Tested and certified by DGUV. Testing specifications: GS-OA-15-04:2015-12 Certificate No.: OA 1651054 • Assembly with flat / ring wrench or alien key possible. • Hand tightening with appropriate wrench is sufficient for a singular lift. • Please observe torque instructions when lifting point is permanently installed resp. at constant swivelling operations and tilting/ turning actions. Other important RUD specific information and specialities to our RUD lifting points can be found in the specific user instruction.

Load ring ICE-LBG-SR 6,7t M30 Super Rotation® Artikel-Nr: