Best sellers USA
2Pages

® ® ® s.92 Fip x Fip full port 1/4”-4” hot forged brass ball valve with patented lockable handle, blow-out proof stem, glass filled PTFE seats and pure PTFE adjustable packing gland. Maximum working pressure 600 psi up to 2”, 450 psi over 2”. Steam rating 150 WSP. Temperature rating: –40°F +350°F. s.92 Mip x Fip Mip x Fip NPT full port 1/4”-2” hot forged brass ball valve, blow-out proof stem, glass filled PTFE seats and pure PTFE adjustable packing gland. Maximum working pressure 600 psi. Steam rating 150 WSP. Temperature rating: –40°F +350°F. s.92 Fip x Fip full port 1/4”-4” hot forged brass ball valve, blow-out proof stem, glass filled PTFE seats and pure PTFE adjustable packing gland. Maximum working pressure 600 psi up to 2”, 450 psi over 2”. Steam rating 150 WSP. Temperature rating: –40°F +350°F. s.131 Stainless Steel conventional port Fip x fip stainless steel ball valve, conventional port, 1/4”-2” NPT with SS lever handle, pure PTFE packing gland. Maximum working pressure 800psi. One piece construction. Temperature rating: –20°F + 350°F. s.130 Fip x Fip stainless steel full port 1/4”-3” NPT ball valve with s/s lockable handle, blow-out proof stem, pure PTFE adjustable packing gland. Maximum working pressure 1000 psi. Steam rating 150 WSP. Temperature rating: -20°F+366°F. s.42 Solder end full port 1/2”-3” hot forged brass ball valve, blow-out proof stem, adjustable PTFE packing gland. Tested and Certified by NSF for drinking water at ambient temperature. Maximum working pressure 600psi up to 2”, 450 psi over 2”. Steam rating 150 WSP all sizes Temperature rating: –4°F + 366°F (applicable to valve, not to solder joints). s.195 fl x fl 3/8”-1/2”-5/8” flare ends combinations gas cock hot forged, blow-out proof stem, double viton O-ring stem seal. Maximum working pressure 450 psi. Temperature rating: –40°F +350°F. Approved for 1/2 psig, 2 psig, 5 psig gas service. s.195 Side drain Fip x Fip and flare End side drain gas cock hot forged, with blue wedge handle, blow-out proof stem, double Viton O-ring stem seal. Maximum working pressure 450psi. Temperature rating: –40°F + 350°F. Approved for 1/2 psig, 2 psig, 5 psig gas service. s.80 Dielectric Fip x Fip union (insulated) one end full port 3/4”-1 1/4” hot forged brass gas meter cock, with tamper proof locking cover, blow-out proof stem, with double Viton O-ring stem sealing. Maximum working pressure: 600 psi (CWP). Temperature rating: –40°F +350°F. s.195 Fip x Fip Gas Cocks Fip x Fip 3/8”-1” gas cock hot forged, blow-out proof stem, double Viton O-ring stem seal. Maximum working pressure 450 psi. Temperature rating: –40°F + 350°F. Approved for 1/2 psig, 2 psig, 5 psig gas service. s.132-2000 psi Fip x Fip stainless steel full port 1/4”-2” NPT ball valve, with s/s lockable handle, blow out proof stem, PTFE adjustable packing gland. Maximum working pressure: 2000 psi to 1”; 1500 psi over. Temperature range: -50°F + 475°F. s.40-70 Cap & Strap Cap and Strap, standard port 1/2”-3/4” hot forged brass ball valve (Solder end female or NPT taper thread by 3/4” hose thread closed by cap), blow-out proof stem, adjustable PTFE packing gland. Maximum working pressure 600psi. Steam rating 150 WSP. Temperature rating: –40°F + 366°F. s.70 Fip x Fip standard port 1/2”-4” hot forged brass ball valve, blow-out proof stem, pure PTFE adjustable packing gland up to 2.1/2”, double sealing (Viton O-Ring + packing gland) for 3” and 4”. Tested and Certified by NSF for drinking water at ambient temperature. Maximum working pressure 600 psi. Steam rating 150WSP. Temperature rating: –40°F +366°F. *most RuB ball valve models also available with lockable oval handles, s/s handles, and “stubby” half size lever handles (all to fit up to 2” valve sizes) s.35 Fip x Fip and Mip x Fip chrome plated brass body high pressure mini 1/8”-1/2” drawn brass ball valve, Viton O-ring stem seal. Maximum working pressure 450 psi. Temperature rating: –40°F +200°F. s.74(41L) NPT 3-way diverting Three way Diverting valve in L Port Horizontal Design. Fitted with patented lever handle that can be place in several positions depending on application. Available in sizes 1/2”-1” NPT. Two Viton O-Rings at stem for maintenance free operation. Maximum working pressure 400 psi (CWP). Temperature Range -4°F+350°F. ® Instrumentation Package 1/4” Fip x Fip needle valve, 2000 psi, #SNI7352 1/4” Mip x Fip needle valve, 2000 psi, #SNI7352 3 1/2” ThermometerWell (1000 psi), #PNI34F2 1/4” Snubber (1000 psi), #SNI8722 CONTACT YOUR LOCAL RUB SALES REPRESENTATIVE OR CALL RUB’S SERVICE CENTER FOR ADDITIONAL PRODUCT DETAILS APPROVALS APPLY ON CERTAIN CONFIGURATION/SIZE ONLY CONTACT YOUR LOCAL RUB SALES REPRESENTATIVE OR CALL RUB’S SERVICE CENTER FOR ADDITIONAL PRODUCT DETAILS APPROVALS APPLY ON CERTAIN CONFIGURATION/SIZE ONLY CONTACT YOUR LOCAL RUB SALES REPRESENTATIVE OR CALL RUB’S SERVICE CENTER FOR ADDITIONAL PRODUCT DETAILS APPROVALS APPLY ON CERTAIN CONFIGURATION/SIZE ONLY CONTACT YOUR LOCAL RUB SALES REPRESENTATIVE OR CALL RUB’S SERVICE CENTER FOR ADDITIONAL PRODUCT DETAILS APPROVALS APPLY ON CERTAIN CONFIGURATION/SIZE ONLY MEETING STANDARDS IS OUR STANDARD MEETING STANDARDS IS OUR STANDARD s.80 Fip x Fip full port 3/4” - 2” hot forged brass gas meter cock with tamper proof locking cover, blow-out proof stem, double Viton O-ring stem seal. Maximum working pressure 600 psi. Temperature rating: –40°F +350°F. *available painted grey option. MEETING STANDARDS IS OUR STANDARD s.89 Fip x Fip standard port 3/8”-2” hot forged brass ball valve blow-out proof stem, double Viton O-ring stem seal to 1” sizes; packing gland 1-1/4”-2”. Maximum working pressure 450 psi. Temperature rating: –40°F +350°F. MEETING STANDARDS IS OUR STANDARD s.195 valves available in a variety of wedge and T-handle colors s.34 Fip x Fip and Mip x Fip 1/8”-1/2” drawn brass ball valve with lever handle and T-handle, double Viton O-ring stem seal. Maximum working pressure 200 psi. Temperature rating: –40°F +200°F. Meets OSHA Requirements s.92 F/F available with s/s trim (ball & stem) in sizes 1/4” through 2”. s.92 F/F available with s/s trim (ball & stem) in sizes 1/4” through 2”. Option s.42 with side tap drain available. s.195 valves available in a variety of wedge and T-handle colors *Most combinations also available with side tap Also available in metric ISO 228 parallel thread Also available in metric ISO 228 parallel thread s.70 available with s/s trim (ball & stem) in sizes 1/4”through 2” s.112/s.114/s.115 gate valves 1/2”-4” hot forged brass gate valves. Temperature rating: +40°F +200°F. s.112 Fip x FipWorking pressure 150 psi up to 2”, 240 psi over 2”. s.114 Fip x Fip Heavy duty,Working pressure 200 psi sizes 1/2”-4”; Steam rating 150WSP. s.115 Solder end,Working pressure 200 psi sizes 1/2”-2”, Steam rating 150WSP. Handles, Stem Extensions and Accessories, including memory stop.