technical datasheet A member of the MTL Instruments Group SmartAlarm Alarm Annunciator / Monitor • DIN Size Module with 8, 16 and 24 channel versions • Internal FCV 24vDC • Pluggable LED's in five colours, Red, Yellow, White, Blue and Green • Internal Logic PSU • Remote Pushbuttons mapped to P/B function. • Fully software configurable through USB port for each individual alarm point using the intuitive, setup utility • Integrated PSU, providing direct connection to 85-264VAC or 88-360VDC. • Wide input DC supply 18-58VDC • Full ISA 18.1 Sequences built in programmable via front Panel USB connection. • Optional IP54 protection • Very low power consumption for longer hold up on standby batteries • No links required for relay configuration Fully featured Compact Annunciator The SmartAlarm brings together many years of development in Alarm Annunciator technology and builds on the functionality of the field proven RTK UC625. The SmartAlarm is designed as a complete alarm system with integral, audible, relays and pushbuttons for the most cost effective solution for monitoring critical process alarms. Incorporating ISA 18-1 1979 (R1992) alarm sequence programmable via the front panel mounted USB connector, the unit also accommodates optional signal duplicating relays, dual horn relays, LED display, making the SmartAlarm an ideal choice where full functionality is required and space is a premium. As a world leading supplier of process alarm equipment, RTK Instruments can provide a solution for all safe and hazardous area industrial applications. Used for monitoring critical alarms, our range of Alarm Annunciators are manufactured to meet customer requirements, with a range of options that can incorporated as required.

FEATURES & BENEFITS Modular Construction Fully Software Configurable The modular design of the SmartAlarm allows units to be assembled in the three standard sizes of 8 , 16, 24 channels, all housed in DIN standard enclosures Each Annunciator has a programming port positioned on the front panel below the Pushbuttons behind an IP rated bung. This is a standard USB connection to connect directly to your laptop or PC using the cable provided with the unit, although any standard USB cable will suffice. Each individual channel can be configured to operate exactly as required with the user selecting...

All the programmable group relays can be set to have the re-flash facility. The means the first alarm to alarm in the group will change the state of the relay and any subsequent alarms within the same group will cause the relay to pulse for approximately 0.5 seconds. Complete Alarm Systems Audible Outputs First-Up Alarms The standard unit has a single integral audible. In addition two common relays can be programmed to drive external audible providing Critical, none critical audible discrimination. In alarm annunciation applications it is often essential to know which alarm occurred first in...

Technical specification INPUTS Alarm Initiation Common Relays Through Hole High Intensity LED's All systems come with five relays as standard, one of which is configured as a "watchdog" relay, which will trip if any card fails or if there is any internal system fault. Relay ratings : - The inputs are bipolar and can accept AC or DC voltages. Only one type can be present on a single unit. Alarm Contacts The standard unit is suitable for volt-free contacts, 24/125 or 48/250 V DC/AC powered inputs. Each input can be easily set to operate from either a Normally Open or Normally Closed field contact....