SG 2431

SG 2431

SG 2431

Product catalog summary
Series Overview:
The document discusses the SG 2431 series of electronic switchgears, highlighting key features such as a 10-digit diode matrix for actual value indication, LED indicators for operating state, and relay output status. It includes current/voltage input, front-side limit value adjustment, and easy adjustment via key switches. Additional functions include level control and delay settings of 5 seconds and 0.1 seconds.
Functionality:
The switchgear monitors process variables as direct current or voltage signals. The input signal is compared with a digitally set limit value, triggering a relay if the signal exceeds or falls below this limit. Two switching functions are possible due to potential-free change-over contacts. Hysteresis can be set between 1-99% using front-side controls. The relay's status is indicated by an LED, and various options are available for adjusting switching points and parameters.
Technical Data:
  • Input: Direct current (0(4)-20mA) with resistance ~50Ω or voltage (0(2)-10VDC) with resistance ~100kΩ. Temperature error is <30ppm/°C.
  • Supply: AC voltage 230V (200-250V) at 50-60Hz, 10mA. EMC standards EN 50081-1 and EN 50082-2 are met.
  • Output: Potential-free change-over contacts with a contact load of <2000VA and a switching voltage range of 0.1-250VAC, max 8A resistive load.
  • Environmental Conditions: Storage temperature ranges from -40 to +70°C, and operating temperature from 0 to 55°C. Isolation voltage is <4kV for input/output and auxiliary AC voltage.
  • Mounting Details: Housing is designed for top hat rail mounting with protection class IP20 for housing and IP10 for clamps. The width is 22.5mm, and the weight is 160g.
Note: Subject to technical alterations.
See more

Catalog excerpts

SG 2431-1

Elektronische Schaltgeräte Electronic switchgears Commutateurs électroniques Baureihen Series Séries • SG 2431 Elektronisches Schaltgerät Electronic limit switch Commutateur électronique Istwertanzeige durch 10 stellige Diodenmartix Betriebszustandsanzeige durch LED Zustandsanzeige Relaisausgang Strom/Spannungseingang Frontseitige Grenzwerteinstellung Einfache Einstellung durch Tastcodierschalter Funktion für Niveausteuerung Zusatzfunktion, Verzögerung 5sek,0.1sek indication of actual value by 10 digit diode matrix indication of operating state by LED high galvanic decupling status indication relay output current / voltage input front side limit value adjustment easy adjustment by key switches function for level control additional function, delay 5 sec, 0.1 sec Affichage de la valeur instantanée sur matrice à diodes 10 chiffres Etat de fonctionnement indiqué par LED Indication de l’état de la sortie du relais Courant/tension d’entrée Réglage des valeurs limites sur l’avant Facilité de réglage par touches de codage Fonction de commande du niveau Fonction auxiliaire, temporisation 5 sec, 0,1 sec

 Open the catalog to page 1
SG 2431-2

Elektronische Schaltgeräte Electronic switchgears Commutateurs électroniques Die zu überwachende Prozessgröße kann als Gleichstrom – oder Gleichspannungssignal vorliegen. Nach interner Aufbereitung des Eingangssignals wird dieses mit dem digital eingestellten Grenzwert verglichen und bei Über- bzw. Unterschreitung des Mess-Signals ein Relais erregt. Durch die Relais mit jeweils einem potentialfreien Umschaltkontakt lassen sich zwei Schaltfunktionen realisieren. Eine Hysterese kann z.B. von 1-99% durch frontseitige Sollwertvorgabe des „oberen Grenzwertes“ und des „unteren Grenzwertes“ eingestellt...

 Open the catalog to page 2
SG 2431-3

Power supply' operating state Zustandsanieige RelaisA Status indication relay A Einstellung Grsnzwsrtschaltsr Schalter Beschreibung Funktion Einstellung Bernerkung Grenzwertfestleg. ocetYunten Gremwertfestleg. unterfoben Messeingang ist Strom signal Messeingang ohne Offset Messeingang rnit Offset, Life- zero Verzoger. Relais A O.ISek off Relais A nicht invertiert Verzoger. Relais B.O.ISek off Relais B nicht invertiert Tastschalter je Relais fur Grenzwert Status indication relay B actual value Switch Discription Function Adjustment Remark Front 2-digit key switch limit value adjustrnen A 0-89%...

 Open the catalog to page 3

All RTK Regeltechnik Kornwestheim catalogs and technical brochures

  1. DR 7537

    6  Pages

  2. 5112 7010

    7  Pages

  3. strainer

    3  Pages

  4. thermostat

    6  Pages

  5. control valve

    13  Pages

  6. control valve

    15  Pages

  7. power pack

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.