*mydirectindustry

DS_RRC-PMM240

Product catalog summary

Overview: The RRC-PMM240 is a power management module designed for mobile applications, offering a maximum output power of 240W to applications and 82W to batteries. It features automatic power source selection and a wide DC input voltage range, making it suitable for integration with standard smart batteries from RRC.

Specifications:

Input: Maximum input voltage is 24VDC, with a power capacity of 192W and a current of 8A. It includes a 12A fuse and protection against reverse polarity and short circuits.
Output: The output voltage matches the DC input voltage when an external power supply is present, or the battery voltage otherwise. It supports a maximum output power of 240W and a current of 10A, with a 12A fuse.
Battery Management: The module supports a battery charge voltage up to 19.2V and a charge current up to 6.2A, with protections against short circuits, over temperature, over voltage, over current, and reverse polarity.
Environmental Conditions: Operating and storage temperatures range from -20°C to 60°C, with a relative humidity tolerance of 5% to 95% non-condensing.
User Interface: Information on charging status, external DC power supply presence, and battery/hardware errors is available via GPIO and SMBus commands.

Applications: The module is suitable for medical and industrial applications requiring power management and smart battery charging capabilities.

Regulatory Approvals: The module complies with international standards IEC 60601-1(ed.3) and its amendments, as well as USA and Canada standards.

Mechanical Details: The board measures 60mm x 50mm x 11mm and weighs approximately 22g. It includes connectors for DC input/output, user interface, and battery.

Additional Resources: RRC provides 3D data for easy integration and further information is available on their website.

Catalog excerpts

TECHNICAL DATA SHEET RRC-PMM240 RRC-PMM240 Power Management Module for Mobile Applications P/N: 100576 240.00W max. output power to application 82.00W max. output power to battery Automatic power source selection Wide DC input voltage range 3D data available of power management module and batteries for easy integration into user application Fits to standard smart batteries from RRC in form factor RRC20xx Applications: Power management and smart battery charging capability for medical and industrial applications Subject to technical changes without notice * Released document – Copy is not subject to revision se

Open the catalog to page 1

TECHNICAL DATA SHEET RRC-PMM240 Specification Input (Power Supply Output) Input voltage range Input power Input current Input fuse Protection Application Output Output voltage range Max. 24.00VDC, min. Battery charge voltage +1.00V 192.00W max. 8.00A max. 12.00A Reverse polarity, short current Equal to DC input voltage if ext. DC power supply is present. Equal to battery voltage if no ext. DC power supply is present. 240.00W max. 10.00A max. 12.00A Total output power Output current Output fuse Power Management Automatic power source selection with seamless transition between ext. DC power supply...

Open the catalog to page 2

TECHNICAL DATA SHEET RRC-PMM240 Regulatory Approvals International USA Canada Mechanical Details Board dimensions (LxWxH) Weight Connectors 60.00mm x 50.00mm x 11.00mm, without cables and connectors Typical 22g DC input & DC output (2 pin) User interface (6 pin) Battery connector (5 pin smart battery connector) To facilitate a fast design-in process for developers, RRC is providing 3D data of the power management module RRC-PMM240 and the battery housings of RRC smart battery. For an application note related to the power management module with additional details contact your RRC representative....

Open the catalog to page 3

All RRC Power Solutions catalogs and technical brochures

DS_CAR12A
3 Pages
PS65
3 Pages
RRC-SMB-UBC-M
3 Pages
RRC1120
3 Pages