*mydirectindustry

TU

Product catalog summary

Working Characteristics:
The TU series valves operate at a working pressure of up to 19 bar, with room temperatures ranging from 0 to 80°C and fluid temperatures from 0 to 140°C. The flow direction is specified in the accompanying scheme, and nominal diameters available are Ø1.0, Ø1.2, Ø1.5, Ø2.0, and Ø2.5. The valves feature direct opening with normally closed (NC) control.

Physical Characteristics:
The valve body is made of PPSU, with gaskets available in EPDM and FKM. The O-ring sealing is EPDM, and both the core and spring are constructed from stainless steel. The assembly is designed with a bayonet fitting.

Installation:
The valve can be installed in any position without affecting its operation, and it is easy to inspect.

Applications:
The modular compact valve is highly versatile and adaptable, suitable for coffee machines, appliances, medical equipment, and water dispensers, especially where water control at high temperatures is required.

Hydraulic Connections:
Inlet and outlet connections are available as quick coupling Ø4-6 mm or hose connector 6 mm.

Electrical Connections:
Details are provided in the attached table.

Solenoid Range:
The solenoid chart provides specifications for various voltage and frequency options, including holding and inrush power, current, duty cycle, insulation class, and approvals. Connections are made via Faston 6.3x0.8 mm.

Marks and Certifications:
Materials are NSF certified, and certain components conform to UL standards and ENEC certification according to EN 60730-2-8 and 60335-1 standards.

Flow Rate:
The flow rate curve is provided in the datasheet.

Catalog excerpts

TECHNICALDATASHEET SCHEDA TECNICA Cod.: FAMILY NAME: TU series FAMIGLIA: Serie TU PHYSICAL CHARACTERISTICS Rev.: Data: 15/05/2024 WORKING CHARACTERISTICS Working pressure: CARATTERISTICHE FISICHE Valve body: Gasket: O-ring sealing Core: Corpo valvola: Guarnizioni: o-ring tenuta Nucleo: Stainless steel Stainless steel Bayonet Acciaio INOX Acciaio INOX Baionetta The valve can be installed in any position with no risk for its operation La valvola puo essere montata in qualsiasi posizione senza compromettere il funzionamento APPLICATIONS APPLICAZIONI Modular compact valve, wide range of customizations, excellent versatility and adaptability to different contexts of use Valvola modulare componibile, ampio range di personalizzazioni, ottima versatility e adattabilita a diversi contesti di utilizzo Coffee machines Medical equipment Water dispensers Wherever there is need for water control, even at high temperatures Attrezzature medicali Distributor! d'acqua Ovunque ci sia necessita di controllo dell'acqua, anche ad elevate temperature Quick Coupling 04-6 mm Hose connector 6 mm Quick Coupling 04-6 mm Hose connector 6 mm ELECTRICAL CONNECTIONS Uscita: Connessione rapida 04-6 mm Portagomma 6 mm Connessione rapida 04-6 mm Portagomma 6 mm SOLENOID RANGE See table attached GAMMA SOLENOIDI Vedi tabella in allegato MARKS AND CERTIFICATIONS NSF (only materials) MARCHI ED APPROVAZIONI NSF (solo materiali) Technical Office - Ufficio Tecnico

Open the catalog to page 1

TECHNICAL DATASHEET SCHEDA TECNICA FAMILY NAME: WORKING SCHEME SCHEMA DI FUNZIONAMENTO Technical Office - Ufficio Tecnico

Open the catalog to page 2

TECHNICAL DATASHEET SCHEDA TECNICA FAMILY NAME: WORKING SCHEME SCHEMA DI FUNZIONAMENTO Technical Office - Ufficio Tecnico

Open the catalog to page 3

TECHNICALDATASHEET SCHEDA TECNICA FAMILY NAME: Working Scheme Schema di funzionamento CONFIGURATION EXAMPLE: MANIFOLD COFFEE SYSTEM inlet OUTLET Technical Office - Ufficio Tecnico

Open the catalog to page 4

TECHNICAL DATASHEET SCHEDA TECNICA FAMILY NAME: WORKING SCHEME SCHEMA DI FUNZIONAMENTO Technical Office - Ufficio Tecnico

Open the catalog to page 5

Dimensional drawing Disegno dimensionale Technical Office - Ufficio Tecnico

Open the catalog to page 6

Technical Office - Ufficio Tecnico

Open the catalog to page 7

Material conforming to the GW test according to the EN 60335-1 and IEC 60695-2-11 standards. Material conforming to UL standards. Certified according to the EN 60730-2-8 and 60335-1 standards. Materiali conformi al test GW secondo le normative EN 60335-1 e IEC 60695-2-11. Materiali conformi agli standard UL. Certificata ENEC secondo la normativa EN 60730-2-8 e la 60335-1 Technical Office - Ufficio Tecnico

Open the catalog to page 8