*mydirectindustry

RD Vent

1 / 9 PagesView full catalog

RD Vent

Product catalog summary

Working Characteristics

Working Pressure: 0 to 0.1 bar
Room Temperature: Maximum 60°C
Fluid Temperature: Maximum 98°C
Flow Direction: Unidirectional
Nominal Diameter: Ø8 mm
Elect. Pilot/Control: Normally Closed (NC)

Physical Characteristics

Valve Body: PPSU
Diaphragm: LSR
Core: Stainless Steel / EN 1.4106
Spring: Stainless Steel / AISI 316
Assembly: Bayonet

Installation

The valve can be installed in any position without affecting its functionality.

Applications

Tank or boiler filling and draining
Animal feeding equipment
Hot and cold beverage vending machines
Water dispensers
Suitable for large water flow at very low pressure and high temperature

Hydraulic Connections

Inlet: Ø12 mm Tang, 24mm or 34mm
Outlet: Ø10 mm Hose, Ø10 mm Tang

Electrical Connections

Refer to the attached table for details.

Solenoid Range

Refer to the attached table for details.

Marks and Certifications

NSF
CE
ENEC

Solenoid Chart

Details various solenoid configurations including voltage, frequency, power, current, and approvals. Highlights include:

12V DC with 8.5W holding power
24V DC with 8W holding power
230V AC with 8.4 to 10.0 VA holding power

Flow Rate

The flow rate curve indicates the relationship between flow (L/min) and pressure (bar), showing a linear increase in flow with pressure.

Catalog excerpts

INSTALLAZIONE The valve can be installed in any position without compromising the functioning. Il prodotto puo essere montato in qualsiasi posizione senza comprometterne il funzionamento. APPLICATIONS Tank or boiler filling and draining Animal feeding equipment Riempimento e svuotamento serbatoi o boiler Dispositivi di alimentazione per animali Water dispensers Distributor! d'acqua automatici. Hot and cold beverages vending machines Distributori automatici di bevande calde e fredde Wherever large flow of water at very low pressure and high temperature are needed. Ovunque siano necessarie grandi portate di acqua a bassissima pressione e alta temperatura HYDRAULIC CONNECTIONS CONNESSIONI IDRAULICHE Inlet: WORKING CHARACTERISTICS Working pressure: Room temperature: Fluid temperature: Flow direction: Nominal diameter: CARATTERISTICHE DI LAVORO Pressione di esercizio: Temperatura ambiente: Temperatura fluido: Direzione fluido: PHYSICAL CHARACTERISTICS CARATTERISTICHE FISICHE Valve body: Stainless steel / AISI 316 Corpo valvola: Acciaio INOX / AISI 316 ELECTRICAL CONNECTIONSCONNESSIONI ELETTRICHE See attached table Vedi tabella in allegato SOLENOID RANGE GAMMA SOLENOIDI See attached table Vedi tabella in allegato MARKS AND CERTIFICATIONSMARCHI ED APPROVAZIONI NSF - CE - ENEC Technical Office - Ufficio Tecnico

Open the catalog to page 1