*mydirectindustry

ER serie

Product catalog summary

1. Overview

This document details the technical specifications for the ER series hydraulic equipment, covering a wide range of models from compact units like ER800 to heavy-duty models such as ER9000, including specialized variants (ERP, ERV, ERR). It serves as a comprehensive reference for selection, installation, and maintenance.

2. Key Specifications

Capacity: Ranges from 120 dm³ (smallest ERP models) up to 23,000 dm³ (largest ER47 series), indicating the volume each model can handle.
Operating Pressure: Typically between 160 and 200 Bar depending on model and application.
Teeth Count: Varies from 2 to 9, influencing gripping and cutting capabilities.
Motor Power: From 2.2 kW for smaller units up to 37 kW for the largest models.
Weight: Spans from approximately 530 Kg to over 18,000 Kg.
Closing Force: Ranges from about 700 Kg to over 13,000 Kg, critical for operational effectiveness.
Operating Times: Opening and closing cycles typically range between 2 and 18 seconds, reflecting efficiency.

3. Model Ranges and Characteristics

ER800 Series: Compact with ~800 dm³ capacity, 180-220 Bar pressure, ~7.5 kW motor power, and ~2000 Kg tine force.
ER1000-1500 Series: Mid-range with 1000-1500 dm³ capacity, 180-220 Bar, up to 10.5 kW motor, and up to 3000 Kg tine force.
ER2000-4000 Series: Larger units with 2000-4000 dm³ capacity, 180-200 Bar, 9.5-15 kW motor power, and 2500-4500 Kg tine force.
ER5000-9000 Series: Heavy-duty models with 5000-9000 dm³ capacity, 200 Bar pressure, up to 18 kW motor power, and tine forces exceeding 4000 Kg.
Specialized Models (ERP, ERV, ERR): Smaller capacities (120-800 dm³), motor power 2.2-7.5 kW, tine forces around 700-1500 Kg, designed for specific applications.

4. Dimensions and Mechanical Details

Detailed dimensions (length, width, height, and other parameters) are provided for each model to support installation and integration.
Hydraulic motor types specified (e.g., REX.A10VSO28DFR, REX.A10VSO45DFR) ensure compatibility and performance.
Tooth diameters and shaft sizes (e.g., Øa75, Øs45) are included for maintenance and replacement considerations.

5. Operational Parameters and Performance

Operating pressures and closing forces are critical to meet performance standards.
Opening and closing times are optimized for cycle efficiency, generally between 2 and 18 seconds.
Motor power ratings are matched to operational demands to ensure adequate force and speed.

6. Recommendations and Best Practices

Select models based on required capacity and tine force aligned with application needs.
Ensure hydraulic pressure and motor power specifications are compatible with the operational environment to prevent underperformance or damage.
Regular maintenance of hydraulic motors and teeth is essential for sustained performance and longevity.
Verify dimensional constraints during installation to guarantee proper fit and function.

7. Summary Tables and Data Interpretation

Multiple tables provide model-specific data including capacity, pressure, motor power, weight, tine force, operating times, and dimensions. These serve as a practical reference for equipment selection based on technical requirements. The data is multilingual but consistently formatted for ease of comparison.

8. Additional Technical Data for ER74, RCC0410, RCC0413, and ER41 Series

Dimensions are provided in millimeters for parameters such as A, B, C, D, E, L, and ØF, with typical values ranging from 450 to 1500 mm.
Most models have a single cylinder and motors rated around 3 kW, with some variation in the ER41 series.
Operating pressures are commonly around 160 Bar.
Blade forces range from approximately 1000 to 1800 Kg depending on the model.
Cycle times for opening and closing typically range from 4.5 to 7 seconds.
Capacities vary from about 280 dm³ to 900 dm³, with weights from 580 Kg to over 2200 Kg.

9. Recommendations for ER74 and ER41 Series

Match cylinder capacity, motor power, and pressure to the required blade force for optimal operation.
Consider cycle times to maintain operational efficiency.
Verify dimensions to ensure installation compatibility.

Conclusion

This document is a comprehensive technical reference for the ER series hydraulic equipment and related models, providing essential specifications, operational parameters, and dimensional data. It supports informed decisions for equipment selection, installation, and maintenance to ensure optimal performance and durability in hydraulic applications.

Catalog excerpts

B A C Modello Model Modelè Modell Capacità Capacity capacité Inhalt Peso Weight Poids Gewicht Denti Teeth Dénts Zähne Motore Motor Moteur Motor Press. Press. Press. Druck Forza alla lama Tine force Puiss. a là lame Schliesskraft je Schale Tempi-Times Temps-Zeite Ap/Op. Ouv./Oef Ch./Cl. Ferm./Schl. Dimensioni-Sizes Dimensions-Abmessungen Schema 1, Scheme 1, Schéma 1, Zeichnung 1 Serie, Range, Série, Reihe: ER800 B A C Forza alla lama Tine force Puiss. a là lame Schliesskraft je Schale Tempi-Times Temps-Zeite Dimensioni-Sizes Dimensions-Abmessungen Capacità Capacity capacité Inhalt Peso Weight...

Open the catalog to page 12

B A C Capacità Capacity capacité Inhalt Peso Weight Poids Gewicht Denti Teeth Dénts Zähne Motore Motor Moteur Motor Modello Model Modelè Modell Press. Press. Press. Druck Forza alla lama Tine force Puiss. a là lame Schliesskraft je Schale Tempi-Times Temps-Zeite Ap/Op. Ouv./Oef Ch./Cl. Ferm./Schl. Dimensioni-Sizes Dimensions-Abmessungen Schema 1, Scheme 1, Schéma 1, Zeichnung 1 Serie, Range, Série, Reihe: ER1000-1500-2000-8P B A C Modello Model Modèle Modell Peso Weight Poids Gewicht denti teeth dénts Zähne Capacità Capacity capacité Inhalt Tempi-Times Temps-Zeite Motore Motor Moteur Motor Press....

Open the catalog to page 13

B A C Modello Model Modèle Modell Capacità Capacity capacité Inhalt Peso Weight Poids Gewicht denti teeth dénts Zähne Motore Motor Moteur Motor Press. Press. Press. Druck Forza al dente Tooth force Puiss. au dent Dimensioni-Sizes Dimensions-Abmessungen Ap/Op. Ouv./Oef Ch./Cl. Ferm./Schl. Tempi-Times Temps-Zeite Schema 1, Scheme 1, Schéma 1, Zeichnung 1 Serie, Range, Série, Reihe: ER3000-3500-4000-8P B A C Modello Model Modèle Modell Capacità Capacity capacité Inhalt Peso Weight Poids Gewicht denti teeth dénts Zähne Motore Motor Moteur Motor Press. Press. Press. Druck Forza al dente Tooth force...

Open the catalog to page 14

B A C Modello Model Modèle Modell Capacità Capacity capacité Inhalt Peso Weight Poids Gewicht denti teeth dénts Zähne Motore Motor Moteur Motor Tempi-Times Temps-Zeite Forza al dente Tooth force Puiss. au dent Press. Press. Press. Druck Dimensioni-Sizes Dimensions-Abmessungen Ap/Op. Ouv./Oef Ch./Cl. Ferm./Schl. Schema 1, Scheme 1, Schéma 1, Zeichnung 1 Serie, Range, Série, Reihe: 4000-5000-9P B A C Modello Model Modèle Modell Capacità Capacity capacité Inhalt Peso Weight Poids Gewicht denti teeth dénts Zähne Motore Motor Moteur Motor Press. Press. Press. Druck Forza al dente Tooth force Puiss....

Open the catalog to page 15

Modello Model Modèle Modell Capacità Capacity capacité Inhalt Peso Weight Poids Gewicht Martin. Cylinders Vérins Zylinder Motore Motor Moteur Motor Press. Press. Press. Druck Forza alla lama Tine force Puiss. a là lame Tempi-Times Temps-Zeite Dimensioni-Sizes Dimensions-Abmessungen Ap/Op. Ouv./Oef Ch./Cl. Ferm./Schl. Schema 1, Scheme 1, Schéma 1, Zeichnung 1 A Modello Model Modèle Modell ER 43/8000 F4 Capacità Capacity capacité Inhalt Peso Weight Poids Gewicht Martin. Cylinders Vérins Zylinder Motore Motor Moteur Motor Press. Press. Press. Druck Forza alla lama Tine force Puiss. a là lame Tempi-Times...

Open the catalog to page 19

B A C Capacità Capacity capacité Inhalt Peso Weight Poids Gewicht Denti Teeth Dénts Zähne Motore Motor Moteur Motor Modello Model Modelè Modell Forza alla lama Tine force Puiss. a là lame Schliesskraft je Schale Press. Press. Press. Druck Tempi-Times Temps-Zeite Dimensioni-Sizes Dimensions-Abmessungen Ap/Op. Ouv./Oef Ch./Cl. Ferm./Schl. Schema 1, Scheme 1, Schéma 1, Zeichnung 1 Serie, Range, Série, Reihe: ER1000L-1500L-2000L-6P B A C Press. Press. Press. Druck Bar Capacità Capacity capacité Inhalt dm³ Peso Weight Poids Gewicht Kg. denti teeth dénts Zähne N. Modello Model Modèle Modell Motore...

Open the catalog to page 20

Capacità Capacity capacité Inhalt Modello Model Modèle Modell Peso Weight Poids Gewicht Martin. Cylinders Vérins Zylinder Motore Motor Moteur Motor Press. Press. Press. Druck Forza alla lama Tine force Puiss. a là lame Tempi-Times Temps-Zeite Dimensioni-Sizes Dimensions-Abmessungen Ap/Op. Ouv./Oef Ch./Cl. Ferm./Schl. Peso Weight Poids Gewicht Martin. Cylinders Vérins Zylinder Motore Motor Moteur Motor Modello Model Modèle Modell Capacità Capacity capacité Inhalt Press. Press. Press. Druck Forza alla lama Tine force Puiss. a là lame Tempi-Times Temps-Zeite Dimensioni-Sizes Dimensions-Abmessungen...

Open the catalog to page 26

B Capacità Capacity capacité Inhalt Peso Weight Poids Gewicht Martin. Cylinders Vérins Zylinder Tempi-Times Temps-Zeite Modello Model Modèle Modell Press. Press. Press. Druck Motore Motor Moteur Motor Forza alla lama Tine force Puiss. a la lame Dimensioni-Sizes Dimensions-Abmessungen Ap/Op. Ouv./Oef Ch./Cl. Ferm./Schl. Schema 1, Scheme 1, Schéma 1, Zeichnung 1 Modello Model Modèle Modell Capacità Capacity capacité Inhalt Peso Weight Poids Gewicht Martin. Cylinders Vérins Zylinder Motore Motor Moteur Motor Press. Press. Press. Druck Forza alla lama Tine force Puiss. a la lame Tempi-Times Temps-Zeite...

Open the catalog to page 27

Peso Weight Poids Gewicht Martin. Cylinders Vérins Zylinder Motore Motor Moteur Motor Press. Press. Press. Druck Modello Model Modèle Modell Capacità Capacity capacité Inhalt Forza alla lama Tine force Puiss. a la lame Tempi-Times Temps-Zeite Dimensioni-Sizes Dimensions-Abmessungen Ap/Op. Ouv./Oef Ch./Cl. Ferm./Schl. Schema 1, Scheme 1, Schéma 1, Zeichnung 1 Modello Model Modèle Modell Capacità Capacity capacité Inhalt Peso Weight Poids Gewicht B Martin. Cylinders Vérins Zylinder Motore Motor Moteur Motor Press. Press. Press. Druck Forza alla lama Tine force Puiss. a la lame Tempi-Times Temps-Zeite...

Open the catalog to page 28

All ROZZI SPA catalogs and technical brochures

Archived catalogs

GRABS FOR DIGGING AND DIFFERENT MATERIALS’ LOADING
5 Pages