770869
2Pages

PRESSURE Product Data Sheet Sensit Trident Series Corrosion Resistant Submersible Level/Depth Transmitter The Sensit Trident Series Transmitter has been specifically designed for the harsh environment of monitoring level of liquids in land fill and effluent sites. The materials of construction ensure protection from even the most aggressive leachates in these applications. ● ● ● ● Lightning protection as standard Superb chemical and corrosion resistance Excellent linearity Wide operational & compensated temperature range Rugged construction Excellent long term stability CE compliant SPECIFICATION Pressure Ranges Power Supply Output Options Zero and Span Setting Non Linearity, Hysteresis & Repeatability (NLH) Compensated Temp Operating Temp Thermal Effects Zero: Span: Safe Over-range Burst Pressure Long Term Stability EMC Protection Electrical Connection Wetted Materials Available from 1mWG to 500mWG vented. Absolute available from 2.5mWG 10 to 32Vdc 4 to 20mA (two wire) +1% of span <+0.25% of span 0oC to 60oC -10oC to 60oC <+0.015% span/oC <+0.015% reading/oC typical 1.5 x rated range minimum 3 x rated range minimum 0.1% span/12 months typical Meets EN2004/108/EC PUR vented cable DUPLEX stainless steel, alumina ceramic, polyurethane, acetal and chemraz O-ring Output: active mV/voltage Calibrated ranges: bar, psi or liquid depth (SG to be specified) Improved NLH : <±0.1% span Intrinsically safe to EEx ia IIC T4 (mA only) Note: Due to the varying composition of Leachate we strongly advise the customer to check for material compatibility prior to purchase as RM&C are unable to guarantee against corrosion of wetted parts when in contact of unknown substances.

Moulded Material Polyurethane 4 core cable with vent tube & strain wire Case Material Duplex steel SAF 2507 Ø 25 Nose Cone Submersible transducers and transmitters must be installed to the RM&C recommended method, please contact the Bramley sales office (on +44 (0)1256 884 900) for details. Every effort has been made during the preparation of this document to ensure the accuracy of statements and specifications. However, we do not accept liability for damage, injury, loss or expense caused by errors or omissions made. We reserve the right to withdraw or amend products or documentation...