1. Catalogs
  2. Rowmark
  3. Reflect-R-Mark®
video corpo

Reflect-R-Mark®

Reflect-R-Mark®

Product catalog summary
Material Description: Reflect-R-Mark® is a laminated impact modified acrylic with a semi-gloss finish, available in sheet size 24"x 48" (610 x 1219 mm) and a thickness of 2-ply 1/16" (1.6mm). It is suitable for interior and exterior signage and legend plates, and can be engraved using a rotating carbide method.
Specifications: The material has notable physical properties including an IZOD impact strength of 1.10 ft lbs/in, tensile strength of 5,500 psi, elongation before break at 50%, and flexural strength of 10,300 psi. It is electrically non-conductive with an arc resistance of 10^12 Ohms/Sq. Meter, and a Rockwell hardness of M45. The specific gravity is 1.15, with a deflection temperature of 180°F (79.44°C) and a coefficient of thermal expansion of 5.6 x 10-5 inch/inch/°F. The Vicat softening point is 208°F (97.78°C).
Usage and Properties: Reflect-R-Mark® softens at approximately 180°F (82.22°C), allowing for bending, and can be drilled, sawed, sheared, and bonded. It is UV stable, warranted for colorfastness for over 2 years, and is RoHS compliant, being free from halogens, PVC, formaldehyde, and phenol. It is also clean room compliant and rated UL 94 HB.
Compliance: The material complies with the Restriction of Hazardous Substances (RoHS 3) directive (2015/863/EU), ensuring it does not contain lead, mercury, cadmium, hexavalent chromium, poly-brominated biphenyls, or poly-brominated diphenyl ethers. Rowmark's products are verified to meet these standards, with further details available on their website.
Terms & Conditions: Rowmark offers a limited warranty for product replacement only, excluding costs for repeat labor or incidental expenses. No other warranties are provided beyond this.
Note: Information is provided in good faith without any express or implied warranty.
See more

Catalog excerpts

Reflect-R-Mark®-1

Material Information SheetMaterial Description: Reflect-R-Mark® Specifications Reflect-R-Mark® material softens sufficiently at approx. 180°F (82.22°C), which enables bending, should that be desired. It can also be drilled, sawed, sheared, and bonded to itself or other materials. Rowmark uses UV stable plastic resins and films in the manufacture of its products to prolong the useful life of the material when used in reasonable conditions as such, Rowmark UV stable materials are warranted for colorfastness for 2+ years. Electrically non-conductive, Insulative. Meets 10"12 Ohms/square meter or higher in electrical resistivity, RoHS compliant (halogen-free), PVC-free, Formaldehyde and Phenol free, clean room compliant and rated UL 94 HB. Material was judged as not contributing to the combustion of the base material. Restriction of Hazardous Substances (RoHS) Rowmark has investigated the Restriction of Hazardous Substances (RoHS 3) directive issued by the European Union (directive 2015/863/EU), through on-line research. This RoHS directive prohibits the distribution of products after June 2015, which contain the following materials; lead, mercury, cadmium, hexavalent chromium, poly-brominated biphenyls and poly-brominated diphenyl ethers. The directive appears to apply to all products that operate on electrical power and contain electronic components. Rowmark complies with the use and disclosure of all halogenated materials and does not incorporate poly-brominated biphenyls or poly-brominated diphenyl ethers in any of its products. Based on our audit, Rowmark plastic sheet products are in compliance with this directive and do not contain any of the elements noted above or in the candidate list in accordance with the referenced directive. Our related MSDS documents may be found on the Rowmark website (http://www.rowmark.com) and can be referenced for further information. Terms & Condition of Sale Rowmark warranty is limited to replacement of product only, and such warranty does not extend to the costs of any repeat labor or incidental costs. LIMITED WARRANTY, WARRANTY DISCLAIMERS AND LIMITATIONS OF REMEDIES AND LIABILITIES: Except as set forth above, Seller makes NO OTHER WARRANTIES concerning the products whatsoever. Note: The above information is given in good faith, but no warranty, express or implied, is given.

 Open the catalog to page 1

All Rowmark catalogs and technical brochures

  1. EcoMark

    2  Pages

  2. Slickers

    1  Page

  3. Textures

    1  Page

  4. LaserMax®

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.