1. Catalogs
  2. Rowmark
  3. LaserMax®
video corpo

LaserMax®

LaserMax®

Product catalog summary
Material Description: LaserMax® is a micro-surfaced impact modified acrylic with a matte finish, available in sheet sizes of 24"x 48 ¾” (610 x 1238 mm) and thicknesses of 2-Ply and 3-Ply (1/32” (.79mm), 1/16" (1.6mm), 1/8" (3.2mm)). It is suitable for interior and exterior signage, legend plates, and clean room applications. Engraving can be done using laser or rotating carbide methods.
Specifications: The material is characterized by its physical properties, including an IZOD impact strength of 1.10 ft lbs/in, tensile strength of 5,500 psi, elongation before break at 50%, flexural strength of 10,300 psi, and electrical arc resistance of 10^12 Ohms/Sq. Meter. It has a Rockwell hardness of M45, specific gravity of 1.15, deflection temperature of 180°F (79.44°C), coefficient of thermal expansion of 5.6 x 10-5 inch/inch/°F, and a Vicat softening point of 208°F (97.78°C).
Material Properties: LaserMax® softens at approximately 180°F (82.22°C), allowing for bending. It can be drilled, sawed, sheared, and bonded. The material is UV stable, electrically non-conductive, insulative, RoHS compliant, PVC-free, and free from formaldehyde and phenol. It is rated UL 94 HB and does not contribute to combustion.
Compliance: The material complies with the Restriction of Hazardous Substances (RoHS 3) directive (2011/65/EU), prohibiting lead, mercury, cadmium, hexavalent chromium, poly-brominated biphenyls, and poly-brominated diphenyl ethers. Rowmark ensures compliance through audits and does not use these substances in its products.
Warranty: Rowmark offers a limited warranty for product replacement only, excluding costs for repeat labor or incidental expenses. No other warranties are provided beyond this.
Disclaimer: Information is provided in good faith without any express or implied warranty.
See more

Catalog excerpts

LaserMax®-1

Material Information SheetMaterial Description: LaserMax® Specifications LaserMax® material softens sufficiently at approx. 180°F (82.22°C), which enables bending, should that be desired. It can also be drilled, sawed, sheared, and bonded to itself or other materials. Rowmark uses UV stable plastic resins and films in the manufacture of its products to prolong the useful life of the material when used in reasonable conditions as such, Rowmark UV stable materials are warranted for colorfastness for 2+ years. Electrically non-conductive, Insulative. Meets 10~12 Ohms/square meter or higher in electrical resistivity, RoHS compliant (halogen-free), PVC-free, Formaldehyde and Phenol free, clean room compliant and rated UL 94 HB. Material was judged as not contributing to the combustion of the base material. Restriction of Hazardous Substances (RoHS) Rowmark has investigated the Restriction of Hazardous Substances (RoHS 3) directive issued by the European Union (directive 2011/65/EU), through on-line research. This RoHS directive prohibits the distribution of products after June 2015, which contain the following materials; lead, mercury, cadmium, hexavalent chromium, poly-brominated biphenyls and poly-brominated diphenyl ethers. The directive appears to apply to all products that operate on electrical power and contain electronic components. Rowmark complies with the use and disclosure of all halogenated materials and does not incorporate poly-brominated biphenyls or poly-brominated diphenyl ethers in any of its products. Based on our audit, Rowmark plastic sheet products are in compliance with this directive and do not contain any of the elements noted above or in the candidate list in accordance with the referenced directive. Our related MSDS documents may be found on the Rowmark website (http://www.rowmark.com) and can be referenced for further information. Terms & Condition of Sale Rowmark warranty is limited to replacement of product only, and such warranty does not extend to the costs of any repeat labor or incidental costs. LIMITED WARRANTY, WARRANTY DISCLAIMERS AND LIMITATIONS OF REMEDIES AND LIABILITIES: Except as set forth above, Seller makes NO OTHER WARRANTIES concerning the products whatsoever. Note: The above information is given in good faith, but no warranty, express or implied, is given.

 Open the catalog to page 1

All Rowmark catalogs and technical brochures

  1. EcoMark

    2  Pages

  2. Slickers

    1  Page

  3. Textures

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.