ROUSSELET CENTRIFUGATION GROUP OR VACUUM COATINGof a product on various substances or partsIMP TYPE KEY FEATURES OF IMP TYPE CENTRIFUGES • Simple operation. • Control of consumption of the applied product. • Deposition of product on the entire surface. • Completely automatic cycle. • Reproducibility guaranteed. • Possibility fir fum tight construction. • Recycling of the product applied. • Non-polluted and clean deposition guaranteed.

GENERAL CHARACTERISTICS • Conical carrying bowl1, installed on the spindle, designed to accept a removable basket that is overturned to discharge the parts (handgrips or trunions for manual handling). • Suspended in 3 points (type SA/SC) or rigid (type RC). • Powered by axial motor (type SA) or side-mounted motor (type RC /SC),, connected to a frequency inverter to adjust rotational speeds. • Product containing and recycling tank2 with pump, filter screen at discharge area, fill and drain caps, low level-detector and visual level, inspection cap, etc. cling tank. • Fully automatic cycle; possibility...

TYPICAL CYCLE OPERATION - centrifuge with removable basket 1- Installation of the removable basket in the centrifuge, loaded with parts. 2- Cover closing. 3- Automatic cycle. COATING PHASE • Coating bowl is fed with the liquid pumped from the tank. • Pump is stopped once the parts are immersed and static coating begins. DEWATERING PHASE • The bowl + basket system’s rotational speed is gradualy increased enabling the liquid to discharge back into the tank. • Dewaterinf of parts at pre-selected speed and for pre-selected duration, so as to leave a thin layer on the surface of the parts. • Optional...

Bowl volume stainless steel, hydrophobic coating (Halar, Rilsan, cothal, etc...). fine particulate liquid filtration system to guarantee clean coating, filter clog detector, sealing level (reinforced, under pressure, etc...). special perforations, suitable filter elements (removable bag), non removable basket, basket with conical bottom (combined with reversing mechanism for parts with • Cover- % significant holdup areas), bottom discharge basket (for spring or pneumatic-assisted, manual massive parts), b°slket with compartments, basket lifting, vapor extracting system, etc... with flat etc■■■...