PLASTAL
2Pages

MACHINE TOOLS MACHINE SPECIFICATIONS SAWING HEAD TCT blade 500 Ø (not supplied). 15 HP motor - 3ph. 415 V + neutral. Cutting length 1050; 2050 or 3050 mm Blade rotation speed : 60 m/s. Transmission by POLY V-belt. Pneumatic-atomised lubrification. Retraction by pneumatic jack at end of cut ( electrical jack on option ). Height of cut adjustable between 0 and 150 mm. (solid panel thickness 120 mm ). Pneumatic retraction of the blade ( adjustable by the control panel on option). PLASTAL 515 PANEL SAWING MACHINE CONSTRUCTOR SUPPORT Treated roller guidance system on strong section prismatic ground rails 63 HRC Adjustable automatic advance between 0 and 6 m/min through electronic variator. Rack and pinion drive system. TABLE Large size fitted with roller balls. Width 800 mm upwards. Total width 1 000 mm. Height of work surface : 1 000 mm. Work surface fitted with ball bearings spaced at 200 mm. Load : 450 kg/m² CLAMPING Pneumatic presser. Clamping stroke: 150 mm. Clamping on both sides of the blade (the presser acting as protective shroud). Anti-tilting device by synchronization of the both pneumatic jacks. Elastic band for stress distribution. SAFETY Security carriage following the blade to prevent user access. C.E conformity. EQUIPMENTS Control console containing control units, ammeter. Operator zone protected. MACHINE TOOLS CONSTRUCTOR ROTY & FILS 41, rue J. Cartier LA VILLE ES NONAIS 35430 CHATEAUNEUF FRANCE Tél : 33 2 99 58 36 71 Fax : 33 2 99 58 37 77 PANEL SAW FOR CUTTING OF HEAVY PLATES OF ALL DIMENSIONS AND LARGE SECTION IN ALUMINIUM, OTHER NON FERROUS METALS AND COMPOSITES MATERIALS THE MOST ECONOMIC PANEL SAW, GARANTEE FOR ACCURATE CUTTING TOGETHER WITH A FAST, SAFE AND PRODUCTIVE OPERATION

TECHNICAL FEATURES: Carbide blade for high speed and high quality cuts. Cutting length 1050, 2050 or 3050 mm. SAWING HEAD SAWING HEAD: TCT blade Ø 500 mm (not supplied). 15 HP motor - 3ph. 415 V + neutral. Blade rotation speed : 60 m/s. Transmission by POLY V-belt. Treated rollers guidance system on strong section prismatic ground rails 63 HRC. Pneumatic-atomised lubrification. Retraction by pneumatic jack at end of cut ( electrical jack on option ). Height of cut adjustable from 0 to 150 mm. Manual adjustement of the blade output. CONTROL PANEL: Very simple to use. Length of cut...