Catalogs >
ROTRONIC AG >
T10-XXXX NTC

T10-XXXX NTC
2Pages

Catalog excerpts

T10-XXXX NTC Benefits • NTC sensor • No influence from the lead • High temperature sensitivity Applications • Dry ice • Freezers • Water baths T10-0013/0113 Probe with ribbon cable DESCRIPTION The T10 temperature sensors are NTC (Negative Temperature Coefficient) thermistors, meaning that the resistance of the NTC decreases with increasing temperature. The T10 temperature sensors are compatible with the RMS-MLOG-T10-868/915 data loggers. The data logger temperature range is limited to -35…80°C. The RMS temperature portfolio covers a wide range of applications, from the coldest such as liquid nitrogen tanks and cryogenic freezers, refrigerators and cold rooms to hotter ones such as water baths, incubators, ovens and autoclaves. Dimensions Rolled, moisture-proof Stainless steel Silicone/PTFE lead Cable length Certain probes are also designed for specific applications for monitoring legionella within water pipes and monitoring room temperature. It is crucial when setting up your RMS-MLOG-T10-868/915 with the T10 temperature probe to configure the logger accordingly with the software as the characteristic curve of each NTC is stored in the firmware. Please see below for the values of each probe. This list is not exhaustive and other probes, diameters and cable lengths are available

Open the catalog to page 1

Stored in RMS software as: Application Cable material Sensor application range Calibration range 2 (look up chart) Cable application range IP protection Cable length (mm) Cable diameter (mm) Probe head material Probe length (mm) Probe diameter (mm) Sensor Accuracy 2 -196…-90 °C 25 °C -80…-30 °C -30…40 °C 40…70 °C 70…150 °C -50…0 °C Subject to technical change without notice. Printing and other errors reserved. TECHNICAL INFORMATION Down to -80 °C possible, but the cable could break on movement. Accuracy is only guaranteed in the sensor application range, applications outside the range can...

Open the catalog to page 2