Catalogs >
ROTRONIC AG >
RMS ACCESSORIES

RMS ACCESSORIES
4Pages

Catalog excerpts

The T10 temperature sensors are NTC (Negative Temperature Coefficient) thermistors, meaning that the resistance of the NTC decreases with increasing temperature. The T10 temperature sensors are compatible with the RMS-MLOG-T10-868/915 data loggers. The data logger temperature range is limited from -35...80°C. The RMS temperature portfolio will cover a various array of applications, from the coldest such as liquid nitrogen tanks and cryogenic freezers to freezers, refrigerators and cold rooms to hotter ones such as water baths, incubators, ovens and autoclaves. Certain probes are also designed for specific applications for monitoring legionella within water pipes and monitoring room temperature. It is crucial when setting up your RMS-MLOG-T10-868/915 with the T10 temperature probe to configure the logger accordingly with the software as the characteristic curve of each NTC is stored within the firmware. Please see for each probe below. This list is not extensive and other probes, diameters and cable lengths are available on demand. For accuracy information please see the RMS-MLOG data sheet. rolronic www.rotronic.com A PST Company (www.processsensing.com)

Open the catalog to page 1

E2-xxA extension cable • Applications: Improved probe access for calibration purposes • Available in 01, 02 and 05m (replace xx with the desired length) • Compatibility: RMS-LOG-L/868/915 and HCD, PCD and CCD E2-xxXX extension cable with open ends • Applications: Various • Available in 01, 02 and 05m (replace xx with the desired length) • Compatibility: RMS-LOG-L/868/915 21.99.0302 / 305 / 310 Ethernet patch cable • Applications: Ethernet wiring • 2 / 5/10m • White • Compatibility: RMS-LOG-L, RMS-GW-868, RMS-DI/DO-L-R AC1321 mounting kit • Applications: RMS wall module mounting • Mounting...

Open the catalog to page 2

Description Filter carriers protect the humidity and temperature sensors against mechanical damage. Filters act as a protective barrier against contaminants/ pollutants that can influence the sensor. When choosing the correct combination of filter carrier and filter there are many factors to consider. Specific conditions such as high air velocities, pollutants in the air, disinfection and cleaning routines, mechanical impacts, high bioactivity, condensation, airborne chemical contaminants and required response time are some of the many considerations.

Open the catalog to page 3