Multi-Head Welding Machine SMH 510 High-performance welding machine for the simultaneous welding of four profile bars to a frame at an angle of 90° with parallel feed with servo-drives Multi-Head Welding Machine SMH 510 Characteristic features: • Electronic positioning of the welding heads • Welding with parallel feed - carriages controlled by servo-drives • PC control • Quick and easy electronic adjustment of all essential parameters such as temperature, paths, times and pressure • Continuous adjustment of the welding seam limitation between 0,2 and 2,0 mm as well as the melt and offset movements with servo drives • Storage of profile-related welding data • Integrated frame tools • Quick changing device for teflon foil • Automatic outfeed Optional extras: Technical data*: • Mechanical and electrical elements for high-temperature and high-speed welding (HTS) • Heating for knives above and below • Limitation knives for laminated profiles • Equipment for the welding of U-frames • Sealing forming units • Bar-code scanner • ROTOX-Web-Control • • • • • All details are subject to alteration without notice to incorporate improvements - 03.04.2013 Connected load (kW): max. 8 Voltage (V): 400 Operating pressure (bar): 6-7 Air comsumption per welding (NL): approx. 150 Welding length (mm): 320 - max. 3500 (without sealing forming units) 430 - max. 3500 (with sealing forming units) depending on specification Welding width (mm): 430 - max. 3500 (without sealing forming units) 500 - max. 3500 (with sealing forming units) depending on specification Profile height (mm): 30-125, option: 30-180 Profile width (mm): max. 140 without tools Machine dimensions W x D x H (mm): depending on specification Weight(kg): approx. 3500 depending on specification Workable material: hollow profiles made of PVC *depending on size and options ROTOX GmbH · Am Sportplatz 2 · 56858 Grenderich Tel. +49 (0)2673 981-0 · Fax +

Multi-Head Welding Machine SMH 510 The heart of the SMH 510: Dynamic servo axes control the whole welding process Proven heating element butt welding in a new dimension The SMH 510 connects the welding method proven since decades with the latest technology and optionally with elements for high-temperature welding (HTS). Dependent on the chosen settings that results in reductions of cycle time of up to 50%, a better look of the inner corners and smoother sealing joints. Motor moveable sealing forming units pushing and pulling Example of a layout for up to 420 standard sashes in 8 hours: Multi-head...