Tilt and Turn Hinge Drilling Machine EBM 230 All details are subject to alteration without notice to incorporate improvements - 14.10.2008 Fully automatic drilling of symmetric corner hinges and rebate stay hinges through uPVC and steel at corners and transoms of frames Technnical data: • • • • • • • Power (kW): 3 Voltage (V): 400 Air pressure (bar): 7 Air consumption: approx. 150 l/processing Workable profile width (mm): 50 - 120 Workable profile height (mm): 50 - 100 Measurement of frame rebate (mm): min. 350 - max. 2500 • Machine dimensions: L x D x H (mm): 3100 x 2300 x 1800 • Weight (kg): approx. 400 • Workable material: PVC hollow profiles with steel reinforcement Characteristic features: • Modern SPS control • Stable welding construction • Two pneumatic two-spindle drill unit moveable over the middle of the table with fixed distance between axes over linear guides • Centrical frame clamping device • Options: - Drill head with 6 drill spindles - Swivel device for drill heads with several spindles for drilling also of transoms