WATER DIVISION
112Pages

WATER DIVISION

2021 water division catalogue

Rototec S.p.A. is a dynamic company in continuous expansion present throughout Italy and abroad. The company was founded in 2000 as part of the System Group, a leader in the production of complete pipeline systems (pipes, fittings, specials,...). It was soon specializing in the production of corrugated and smooth tanks in linear polyethylene manufactured using rotational moulding technology. Over the years, Rototec S.p.A. has always felt the need to distinguish itself on the Italian and international markets, investing its resources in research and in updating its own production to meet...

rototec services > Organisation of training meetings, technical seminars and in-house training > A large network of agents and retailers throughout Italy and abroad > Design work during the plant sizing phase > Digital support during design work using tools such as: . plant configuration software . bim libraries . website updated in real time > Prompt delivery > On-site technical support > After-sales service

system group in the worlc

rototec & systemgroup System Group was created in a small town Inland of Mi Plastic Romania). The group further reinforced its Pesaro (Lunano) as a result of an idea by entrepreneur Alvaro Boscarini who, in 1979, had founded Centraltubi for the production of polyethylene pipes. The group was formed at the start of the 1990's when Centraltubi was joined by Futura, a company operating in the pipe fittings, accessories and specials market. These were to be the first steps on the road to success which, in the following years, saw the birth of five other important businesses: Sa.Mi Plastic...

WATER DIVISION UNDERGROUND INSTALLATION ACCESSORIES OTHER PRODUCTS

WATER DIVISION EXTERNAL TANKS UNDERGROUND TANKS RAINWATER HARVESTING AND RE-USE SYSTEMS CHAMBERS TECHNICAL SECTION

EXTERNAL TANKS

water division external tanks vertical standard blue Type Above ground tank Applications Storing foodstuffs - Water, oil, wine Volumes From 50 to 10000 litres Installation Simply placed directly on a flat supporting surface Available colours: on request | grey green terracotta Full drain outlet Threaded insert dimensions cm

water division external tanks panettone standard blue Type Above ground tank Applications Storing foodstuffs - Water, oil, wine Volumes From 500 to 14300 litres Installation Simply placed directly on a flat supporting surface Available colours: on request | grey green terracotta Full drain outlet Threaded insert dimensions cm THREADED INSERTS IN GALVANISED BRASS (on request)

water division external tanks cisterna standard blue Type Above ground tank Applications Storing foodstuffs - Water, oil, wine Volumes From 300 to 5000 litres Installation Simply placed directly on a flat supporting surface Available colours: on request | grey green terracotta Threaded insert dimensions cm

water division external tanks Type_ Above ground tank Applications Storing foodstuffs - Water, oil, wine Volumes From 1000 to 2000 litres Installation Easy to position and move, designed for narrow passages, cellars, basements, placed directly on a flat supporting surface standard blue on request | grey green THREADED INSERTS IN GALVANISED BRASS

water division external tanks valigia standard blue Type Above ground tank Applications Storing foodstuffs - Water, oil, wine Volumes From 500 to 1000 litres Installation Simply placed directly on a flat supporting surface Available colours: on request | grey green terracotta

water division external tanks standard blue Type Above ground tank Applications Storing foodstuffs - Water, oil, wine Volumes From 300 to 500 litres Installation Simply placed directly on a flat supporting surface Available colours: on request | grey green terracotta Cover with vent

water division external tanks snello Type_ Above ground tank Applications Storing foodstuffs - Water, oil, wine Volumes From 300 to 800 litres Installation Simply placed directly on a flat supporting surface. Ideal for small spaces standard blue on request | grey green

water division external tanks sottotetto Type Above ground tank Applications Storing foodstuffs - Water, oil, wine Volumes 300 litres Installation Ideal for rooms with reduced headroom. Simply placed directly on a flat supporting surface Available colours: standard blue grey green terracotta Cover with vent THREADED INSERTS IN GALVANISED BRASS

water division external tanks standard blue Type Above ground tank Applications Storing foodstuffs - Water, oil, wine Volumes 500 litres Installation Simply placed directly on a flat supporting surface Available colours: on request | grey green terracotta 78 cm Cover with vent rototec THREADED INSERTS IN GALVANISED BRASS

water division external tanks standard blue Type Above ground tank Applications Storing foodstuffs - Water, oil, wine Volumes From 300 to 500 litres Installation Simply placed directly on a flat supporting surface Available colours: on request | grey green terracotta Full drain outlet Cover with vent THREADED INSERTS IN GALVANISED BRASS

water division external tanks kitank Type_ Above ground tank Supply Supplied in 2 parts (base and cover) + cap with vent Volumes From 800 to 1300 litres Installation Simply placed directly on a flat supporting surface on request | grey green standard blue

WATER DIVISION EXTERNAL TANKS OPTIMISATION OF WORKING VOLUMES DURING STORAGE AND TRANSPORT how much can I save? -60% storage volumes in the warehouse transport costs full load on truck TECHNICAL CHARACTERISTICS The new range of Rototec “KITank” tanks has been designed to reduce to a minimum the working volume during storage and transport. Thanks to the fact that the tanks can be dismantled and stacked it is possible to store and transport a large number of tanks in a very small space, thus reducing the working volume and above all the cost of transport. The versatility of these tanks means...

water division external tanks To provide a metal threaded female connection to replace the classic threaded unions co-moulded in the above-ground tanks. Fi Material M-F threaded reducer fitting in galvanised brass, ideal for contact with potable water, with EPDM washer. Application The fitting is screwed into the threaded hole co-moulded in the tank, then tightened so that the washer forms a seal between the wall of the tank and the shoulder of the fitting itself. To tighten the fitting, use a spanner or, even better, a socket wrench. Guarantee The fitting is in fact a reducer, therefore...