Axially Assembled, External Beveled These rings look exactly like their SH counterpart, only they have a 15° angle on the inner edge. This combines with a complimentary groove angle to eliminate endplay by wedging itself between the groove and the retained part. *** FOR PLATED RINGS, ADD .002" TO THE LISTED MAXIMUM THICKNESS (T) AND BEVELED END THICKNESS (U) VALUES. * F.I.M. (FULL INDICATOR MOVEMENTJ-MAXIMUM ALLOWABLE DEVIATION OF CONCENTRICITY BETWEEN GROOVE AND SHAFT. FOR HARDNESS SPECIFICATIONS, SEE END OF THIS SECTION. For the most up-to-date specifications, online ordering, quotations & sample orders, visit www.rotorclip.com

i BASED ON HOUSINGS/SHAFTS MADE OF COLD ROLLED STEEL. FOR AN EXPLANATION OF FORMULAS USED TO DERIVE THRUST LOAD AND OTHER PERFORMANCE DATA, CONTACT THE ROTOR CLIP ENGINEERING DEPARTMENT. FOR HARDNESS SPECIFICATIONS, SEE END OF THIS SECTION. For the most up-to-date specifications, online ordering, quotations & sample orders, visit www.rotorclip.com 45

Axially Assembled, External Beveled These rings look exactly like their SH counterpart, only they have a 15° angle on the inner edge. This combines with a complimentary groove angle to eliminate endplay by wedging itself between the groove and the retained part. Free Diameter & Ring Measurements Shaft Diameter & Groove Dimensions Clearance Diameter Expanded Over Shaft Clearance Diameter & Gaging Diameter * F.I.M. (FULL INDICATOR MOVEMENT-MAXIMUM ALLOWABLE DEVIATION OF CONCENTRICITY BETWEEN GROOVE AND SHAFT. ***FOR PLATED RINGS ADD .002" TO THE LISTED MAXIMUM THICKNESS. MAXIMUM RING THICKNESS...

I BASED OH HOUSINGS/SHAFTS MADE OF COLD ROLLED STEEL. FOR AN EXPLANATION OF FORMULAS USED TO DERIVE THRUST LOAD AND OTHER PERFORMANCE DATA, CONTACT THE ROTOR CLIP ENGINEERING DEPARTMENT. HARDNESS RANGES: BERYLLIUM COPPER RINGS For the most up-to-date specifications, online ordering, quotations & sample orders, visit www.rotorclip.com