DSH Shaft Rings Axially Assembled, External, Metric Once installed in the groove of a shaft, the portion of the ring protruding from the groove (also called a "shoulder") holds an assembly in place. Alternate Lug Design Manufacturer's Option Alternate Design Manufacturer'sOption sizes > -165 ALL DIMENSIONS IN MILLIMETERS. ‘The radius “R" on the load side must not exceed 0.1T. “* FOR PLATED RINGS, ADD 0.05 TO THE LISTED MAXIMUM THICKNESS. MAXIMUM RING THICKNESS WILL BE A MINIMUM OF 0.005 LESS THAN THE LISTED GROOVE WIDTH (W) MINIMUM. FOR HARDNESS SPECIFICATIONS, SEE END OF SECTION.

FreeDiameter&RingMeasurements With Section B-B Groove Detail Shaft Diameter & Groove Dimensions Maximum Corner Radius & Chamfer Alternate Design Manufacturer'sOption Alternate Lug Design Manufacturer's Option C2DCS3 Alternate Design Manufacturer'sOption sizes > -165 ALL DIMENSIONS IN MILLIMETERS. *The radius "R" on the load side must not exceed 0.1 T. *** FOR PLATED RINGS, ADD 0.05 TO THE LISTED MAXIMUM THICKNESS. MAXIMUM RING THICKNESS WILL BE A MINIMUM OF 0.005 LESS THAN THE LISTED GROOVE WIDTH (W) MINIMUM. FOR HARDNESS SPECIFICATIONS, SEE END OF SECTION. For the most up-to-date specifications,...

DSH Shaft Rings Axially Assembled, External, Metric Once installed in the groove of a shaft, the portion of the ring protruding from the groove (also called a "shoulder") holds an assembly in place. Groove Detail FreeDiameter&RingMeasurements With Section B-B Shaft Diameter & Groove Dimensions Maximum Corner Radius & Chamfer Alternate Design Manufacturer'sOption Alternate Lug Design Manufacturer's Option Alternate Design Manufacturer'sOption sizes > -165 ALL DIMENSIONS IN MILLIMETERS. ‘The radius "R" on the load side must not exceed 0.1T. *“ FOR PLATED RINGS, ADD 0.05 TO THE LISTED MAXIMUM THICKNESS....

www.rotorclip.com+1 732.469.7333 • [email protected] R max- FreeDiameter&RingMeasurements With Section B-B Shaft Diameter & Groove Dimensions Alternate Design Manufacturer'sOption Alternate Lug Design Manufacturer's Option Alternate Design Manufacturer'sOption sizes > -165 ALL DIMENSIONS IN MILLIMETERS. *The radius "R" on the load side must not exceed 0.1T. *** FOR PLATED RINGS, ADD 0.05 TO THE LISTED MAXIMUM THICKNESS. MAXIMUM RING THICKNESS WILL BE A MINIMUM OF 0.005 LESS THAN THE LISTED GROOVE WIDTH (W) MINIMUM. FOR HARDNESS SPECIFICATIONS, SEE ENO OF SECTION. For the most up-to-date specifications,...

DSH Shaft Rings Axially Assembled, External, Metric Once installed in the groove of a shaft, the portion of the ring protruding from the groove (also called a "shoulder") holds an assembly in place. Groove Detail FreeDiameter&RingMeasurements With Section B-B Shaft Diameter & Groove Dimensions Maximum Corner Radius & Chamfer Alternate Design Manufacturer'sOption Alternate Lug Design Manufacturer's Option C2DCS3 Alternate Design Manufacturer'sOption sizes > -165 ALL DIMENSIONS IN MILLIMETERS. ‘The radius ”R" on the load side must not exceed 0.1T. “ * FOR PLATED RINGS, ADD 0.05 TO THE LISTED MAXIMUM...

Groove Detail FreeDiameter&RingMeasurements With Section B-B Shaft Diameter & Groove Dimensions Maximum Corner Radius & Chamfer Alternate Design Manufacturer'sOption Alternate Lug Design Manufacturer's Option C2DCS3 Alternate Design Manufacturer'sOption sizes > -165 ALL DIMENSIONS IN MILLIMETERS. "The radius "R" on the load side must not exceed 0.1T. *** FOR PLATED RINGS, ADD 0.05 TO THE LISTED MAXIMUM THICKNESS. MAXIMUM RING THICKNESS WILL BE A MINIMUM OF 0.005 LESS THAN THE LISTED GROOVE WIDTH (W) MINIMUM. FOR HARDNESS SPECIFICATIONS, SEE END OF SECTION. For the most up-to-date specifications,...

DSH Shaft Rings Axially Assembled, External, Metric Once installed in the groove of a shaft, the portion of the ring protruding from the groove (also called a "shoulder") holds an assembly in place. Groove Detail FreeDiameter&RingMeasurements With Section B-B Shaft Diameter & Groove Dimensions Maximum Corner Radius & Chamfer Alternate Design Manufacturer'sOption Alternate Lug Design Manufacturer's Option C2DCS3 Alternate Design Manufacturer'sOption sizes > -165 ALL DIMENSIONS IN MILLIMETERS. *Ttie radius "R" on the load side must not exceed 0.1T. *** FOR PLATED RINGS. ADD 0.05 TO THE LISTED MAXIMUM...

Groove Detail FreeDiameter&RingMeasurements With Section B-B Shaft Diameter & Groove Dimensions Maximum Corner Radius & Chamfer Alternate Design Manufacturer'sOption Alternate Lug Design Manufacturer's Option C2DCS3 Alternate Design Manufacturer'sOption sizes > -165 ALL DIMENSIONS IN MILLIMETERS. *The radius “R" on the load side must not exceed 0.1 T. ** THESE PARTS ARE MADE WITH A CONSTANT SECTION WIDTH (NO TAPER) *** FOR PLATED RINGS, ADD 0.05 TO THE LISTED MAXIMUM THICKNESS. MAXIMUM RING THICKNESS WILL BE A MINIMUM OF 0.005 LESS THAN THE LISTED GROOVE WIDTH (W) MINIMUM. HARDNESS RANGES: STAINLESS...