*mydirectindustry

DE

Product catalog summary

Overview: The document provides technical specifications for DE Shaft Rings, specifically the DIN 6799 standard, which are radially assembled, external E-shaped metric retaining rings. These rings are widely used due to their effective retention capabilities.

Specifications: The E-shaped retaining rings have three prongs that make contact with the groove's bottom, providing a shoulder for assembly retention. Key measurements include shaft diameter, groove dimensions, maximum corner radius, chamfer, and clearance diameter when installed in the groove. The radius 'R' on the load side should not exceed 0.1T.

Installation: Installation tools are available at rotorclip.com, where users can also find the most up-to-date specifications, place orders, and request samples.

Catalog excerpts

Radially Assembled, External E, Metric Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”). Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies. Clearance Diameter Installed In Groove Ring Measurements Shaft Diameter & Groove Dimensions Maximum Corner Radius & Chamfer Edge Margin (Y) The radius “R” on the load side must not exceed 0.1T. Installation tools can be found at rotorclip.com/pliers_tools_applicators_kits For the most up-to-date specifications, online ordering, quotations & sample orders, visit www.roto

Open the catalog to page 1