Catalogs >
Rotex Automation Limited >
cartridge solenoid valve

cartridge solenoid valve
12Pages

Catalog excerpts

YXE SERIES : SUPER HIGH FLOW VALVE ISLAND CARTRIDGE SOLENOID TECHNICAL FEATURES • High flow 1100 lit/min, kv=16, Cv=1.12 • Number of valves can be in any combination. Maximum valves limited to 22 Solenoids • There are no limitations to the number of valves due to its modular construction. It is more dependent on the flow rate of each valve. The total flow rate cannot exceed 6000 lit/min. The total flow rate is the flow rate maximum at any given time when multiple valves are operated simultaneously • Easy recognition for the valves. All the valves are numbered and can be altered as per the wiring diagram of the customer • Life expectancy is more than 60 million cycles • Easy installation • Multi air pressure ports. Up to 3 different pressure ports. The valves are available with a blocking cartridge. This allows the customer to have two or three different air sources • Interface with CANOPEN, DEVICENET, PROFIBUS and ASi • Air inlet and exhaust are provided on both the sides for the tubing convenience • Pilot exhaust is common for easy porting.The pilot exhaust is properly gasketed and is then brought to the end plates for tubing. This ensures no oil leaks inside the panel. The noise level also gets reduced due to the tubing • No lubrication is required. YXE is life time lubricated TECHNICAL FEATURES • Long life EMATAL anodized body. Spool is hard anodized, with high life seals. The body is treated with special anodizing treatment with Titanium Oxide and Moly Oxide for high resistance to corrosion. The Moly gives self lubricating property for high life. The seals are floating for most of the stroke. The seals are designed for self compensation. • Spring less valves. Spool returns with air. These features make the valve have a small response time and a long life. The single solenoid valves are provided with the spring only to ensure that the spool is in home position on air failure. • Multi version possible in the same size. 5/2 single or double solenoid, all versions of 5/3 and two 3/2 valves can be available in the same body. The construction of the main valve body does not change. Hence the customer can order a kit to change from one version to another. Similarly 2/2 version can be chosen. • Intrinsically safe option available. 1200 operations / min. • Valves can be converted to dual flow by converting all valves to external air, inlet in 3 & 5 & exhaust in 1 Specifications are subject to change without notice

Open the catalog to page 1

YXE SERIES : SUPER HIGH FLOW VALVE ISLAND Operating Pressure Temperature Range External Pressure Manual Override Flow Rate 5/3 center off, pressurized, exhaust Air or Neutral gases filtered to 50um lubricated or not 3.5 bar or minimum as applicable for the valve type. 1/8, 1/4, V* BSP or NPT or Direct pipe fittings. See port connection option for the details. Impulse or Slide and Lock. See solenoid options for the details. Body, Covers Side Cover Other Parts High grade Aluminium EMATAL treated. Pressure die cast Aluminium Epoxy Painted. High grade Aluminium Hard Anodized. High Grade...

Open the catalog to page 2

YXE SERIES : SUPER HIGH FLOW VALVE ISLAND LIGHT INDICATION High glow LED for better indication. All LED are covered by an optical lens. This enables the indication to be seen clearly in day light where as in the panel the glow looks Standard 25 pin D connector is used for solenoid connection, which can be adjusted in two positions. The D connector male fits on the female D connector with the water proof gasket. For top entry and side entry, the gaskets are different. Customer can change the direction of interface from top to side. YXE can be supplied with built in pipe connectors which can...

Open the catalog to page 3

YXE SERIES : SUPER HIGH FLOW VALVE ISLAND FOOT MOUNTING Foot mounting is available as a standard feature. In case of field mounting the foot mounting can be used. DIN rail mounting is available as a standard feature. The mounting and lock for the DIN rail is standard. Click mounting makes the mounting on the panel easy. CARTRIDGE FLEXIBILITY Extra valve blocks can be added or one or more can be removed. The valve can be added at the customer's end. The wiring is done for all the pins. The customer can choose the option of replacing the complete harness. MULTIPLE INLETS Two different...

Open the catalog to page 4

YXE SERIES : SUPER HIGH FLOW VALVE ISLAND FEMALE CORD Cord with 25 Pin female D-connector can be used for wiring YXE island to PLC/controller Cord is available in length of 1 m,3m &5m Optionally one side D connector & one side cut end BLOCKING CARTRIDGE Multiple Air Supply can be provided by using Blocking Cartridge. Blocking cartridge allows twin supply using both Inlets on end plates. It is recommended to tube the exhaust ports outside the panel. In case of open installation all the exhaust ports should be provided with sintered bronze silencers. Specifications are subject to change...

Open the catalog to page 5

YXE SERIES : SUPER HIGH FLOW VALVE ISLAND WIRING METHODOLOGY METHOD: ADDRESSING WITH STANDARD PINNING METHOD: ADDRESSING WITH OPTIMISED PINNING Specifications are subject to change without notice

Open the catalog to page 6

YXE SERIES : SUPER HIGH FLOW VALVE ISLAND Specifications are subject to change without notice

Open the catalog to page 7

YXE SERIES : SUPER HIGH FLOW VALVE ISLAND Specifications are subject to change without notice

Open the catalog to page 8

YXE SERIES : SUPER HIGH FLOW VALVE ISLAND YXE VALVE ISLAND WITH PROFIBUS-DP The YXE island is designed to overcome the lengthy wiring. It is easy to operate, maintain and control. Solenoid valves island is configured to exchange data through fieldbus using PROFIBUS-DP protocol. The fieldbus connectivity is achieved by using Rs. 485 interface. COMMUNICATION CHARACTERISTIC Transmission Shielded and twisted pair. FIELDBUS Structure Line or tree using repeaters. FIELDBUS cable length 1200 m at 9.6 kbps and 100 m at 12 Mbps. Island addressing Rotary Switch on the board. ELECTRICAL CHARACTERISTIC...

Open the catalog to page 9

YXE SERIES : SUPER HIGH FLOW VALVE ISLAND PNEUMATIC ELEMENTS All the options are available as specified. All the pressure ranges are applicable as specified. It is recommended to use all the parts as specified by ROTEX. All the valve islands are supplied duly tested for FIELDBUS. Kindly specify the special characteristics as required. PROFIBUS-DP connection. The right side of the YXE valve island as viewed from top will be as shown. The valve island is provided with two M 12 connectors for communication and one M 8 connector for power supply wiring with T-connector Wiring with 2XM12...

Open the catalog to page 10

cartridge solenoid valve 12Pages

Catalog excerpts

All Rotex Automation Limited catalogs and technical brochures

cartridge solenoid valve
12Pages