2/2 DIRECT ACTING HIGH PRESSURE SOLENOID VALVE TYPE • Bubble tight shut off • Mounts in any position • Vibration resistance up to 9g • Suitable for high speed cycling • Speed up to 300 cycles/ min • Life >2 million cycles WETTED PARTS Code Guide Assembly Plunger, Insert Seat, Seals PTFE, Viton AMBIENT AND FLUID TEMPERATURE (Refer page 25 for ordering code) CODE SPECIAL VERSION AND SUFFIX Seal Kit : Oring Set, Plunger Assembly Suffix : (Valve) AM Special version : (Solenoid) CO, FR, SS, LC, TM Repair Kit : Oring Set, Plunger Assembly, Springs, Guide Assembly Solenoid Kit : Solenoid, Gasket , Nut PORT CONNECTION Air, Inert Gases, Water, Vacuum, Free Flowing Liquids, Oil, Diesel, Kerosene, LPG, CNG Contact Rotex for • Any other ambient, fluid temperature, media and application • PED approved valve OIL Media Temperature Restricted from 0 °C to 100 °C

2/2 DIRECT ACTING HIGH PRESSURE SOLENOID VALVE CONSTRUCTION REFRENCE NUMBER SOLENOID SIZE LARGE ENCLOSURE FLYING LEAD SOLENOID ENCLOSURE WEATHER EXPLOSION SUFFIX PROOF PROOF MANUAL OVERRIDE BODY MATERIAL AND INTERNALS VALVE TYPE FLOW FACTOR kv (LPM OF WATER @ 1 bar ΔP) PREPORT SSURE CONNECTION bar PILOT PRESSURE SOLENOID 18 Cable Entry M20 x 1.5 M25 x 1.5 1/2” NPT  = Do not specify when opted for. Refer Page = Options available ORDERING CODE AND EXAMPLE VALVE + SOLENOID VALVE TYPE SUFFIX ORIFICE VOLTAGE CURRENT PORT CONNECTION SOLENOID ENCLOSURE BODY AND INTERNALS SEAL - MEDIA + SPECIAL VERSION...