Series500
1Pages

{{requestButtons}}

Catalog excerpts

Series500 - 1

Series 500 Specifications and Dimensions STANDARD FEATURES: AVAILABLE OPTIONS: • Special motors including, inverter duty, wash-down and stainless steel as well as special voltages and frequencies. • 230/460 volt, 60 Hz. explosion proof motors (see options for starters and controls). • Special single and double mechanical seals for vacuum and/or pressure applications. • Designed to bolt to a standard ANSI flange. • Mobile hydraulic lifts in either carbon or stainless steel can be used with models through 10 HP. • Equipped with a single mechanical seal rated for vacuum applications (see options for special seals). • Air/oil floor mounted hydraulic lifts are available for all sizes. • Standard, single-stage Rotor/Stator supplied with either disintegrating, slotted, square hole or fine screen stator head. • Glass filled or solid Teflon bushings or Stellite bushing and shaft sleeve (for abrasive applications). • Type 316 stainless steel wetted parts. • All non-stainless steel external surfaces coated with a white two part epoxy paint. • Shaft mounted down-thrust or circulation propellers to enhance circulation of material in a vessel. • Bronze shaft support bushing. • Controls such as inverters, motor starters, or explosion proof operators stations are available (voltage, frequency and type of enclosure must be specified). • SLIM System for incorporating powders directly into the high shear zone. • Custom built atmospheric or pressure/ vacuum-rated vessels can be supplied for use with series 500 units. E F Upper Flange Dia. Mounting Weight Weight Flange Lbs. Kgs. mm Nom.Dia. " " 11 279 4 90 41 CHARLES ROSS & SON COMPANY P.O. Box 12308, 710 Old Willets Path, Hauppauge, NY 11788 • Fax: 1-631-234-0691 • Tel: 1-631-234-0500 Website: www.mixers.com • Email: sales@mixers.com

Open the catalog to page 1

All ROSS Mixers catalogs and technical brochures

  1. HSM-100LCI-T

    2 Pages

  2. DCB

    1 Pages

  3. VCB

    1 Pages

  4. CDA

    1 Pages

  5. PVM

    1 Pages

  6. Series700

    2 Pages

  7. Series100

    1 Pages

  8. Series400

    1 Pages

  9. Blenders

    12 Pages