A-Series (Atmospheric) Vertical Blender Specifications and Dimensions STANDARD FEATURES: OPTIONAL FEATURES: • 10 through 500 cubic feet capacity • Wetted parts of carbon steel, stainless steel 316 or special alloys • Stainless steel type 304 wetted parts • Atmospheric or internal pressure construction • Designed for atmospheric operation • Sanitary type construction • Hinged cover sections for charging of raw materials • Cover openings as required • Flange for discharge valve • Split and hinged cones for special applications • Sandblasted finish on exterior, 80 grit finish on interior surfaces • All exterior non-stainless surfaces are painted with a white two-part epoxy • Side access and clean-out ports • Spherical, Flush Type Ball and Knife gate discharge valves • TEFC motors and controls • 230/460 volt, 60 Hz, three phase, explosion-proof motors (see options for starters and controls) • Controls such as variable frequency drives, motor starters, and operator stations are available • Single speed screw and orbital arm drives • Spray nozzles for liquid introduction • Unsupported mixing screw • Lumpbreakers for solids or agglomerates size reduction • Start under full load • Dimpled or baffled jackets for heating or cooling • Support brackets for through the floor mounting or legs for floor mounting • Thermocouples for temperature readout • Special gasket materials such as Viton are available CHARLES ROSS & SON COMPANY P.O. Box 12308, 710 Old Willets Path, Hauppauge, NY 11788 • Fax: 1-631-234-0691 • Tel: 1-631-234-0500 Website: www.mixers.com • Email: [email protected]

A-Series (Atmospheric) Vertical Blender Specifications and Dimensions Optional Slide Gate Valve – ideal for dust-tight, liquidtight, or vacuum-tight operation. Optional Ball Valve – For vacuum/pressure blending or liquid/ solid blending. Optional Spherical Valve – pneumatically operated, this valve minimizes dead space and provides a large discharge opening. Working Cap Cubic Feet A Upper Cone Diameter