PVM 300-750 Specifications and Dimensions STANDARD FEATURES OPTIONAL FEATURES Change can design for use with multiple mix vessels. Wetted parts of stainless steel type 316, Hastelloy or other special alloys. Mix vessel locating and locking device. Vertical lift design with controls for lowering agitators to the operating position. Mixer sheathing available in carbon steel or polished stainless steel. Wetted parts are stainless steel type 304, polished to an 80 grit finish. Sanitary designs with special seals, polish, and sanitary connections. Vacuum and/or internal pressure designs. Sight ports, inlet and outlet nozzles and flush tank discharge valves are available. Stainless steel type 304 mix vessel cover. Non-stainless steel components are finished with a durable twocomponent paint. Temperature probes, pressure transducers, and other batch sensors can be included. Up to three independently driven agitators including an Anchor, High Speed Disperser, and High Shear Rotor/Stator Mixer. Agitator drive motors, safety limit switches, controls, and mixer prewiring available in explosion proof configurations. Drive motors are TEFC induction motors. Mix vessels can be jacketed for heating/cooling and internally machined for use with a Ross Discharge System. Safety limit switch to prevent operation of the agitator drives when the mix vessel is removed or when agitators are raised from the mixing position. Mix vessels are available on casters and special raised bases. Control systems are available including variable speed systems and PLC based controllers. Complete systems can include controls, vacuum pump, heater/chiller and other auxiliary equipment. Custom agitators and other special features can be incorporated into the design. Mixing Capacity Full Anchor Anchor Disperser Disperser Rtr/Str Rtr/Str HP Capacity HP Speed HP Speed Speed Vessel Vessel Vessel Dia Inside OAH Height 54 55 1/2 38 Charles Ross & Son Company P.O.Box 12308, 710 Old Willets Path, Hauppauge, NY 11788 - Tel: 1-631-234-0500 - Fax: 1-631-234-0691 Website: www.mixers.com - Email: [email protected]