ROSS Laboratory High Shear Mixer HSM-100LCI-T Specifications and Dimensions STANDARD FEATURES: • 1 HP drive, 115 volt, 50/60 Hz, single phase, 20 amp motor. • Mixer and controls are wired and include a cord and plug. • IP55/NEMA 12 motor. • Variable speed control from 500 -10,000 rpm (+/- 1% speed accuracy). • Color touch screen control and display including RPM, percent of load, batch timer and temperature (up to 300° F or 150°C). • Electronic Push-Button Lift. • Stainless steel type 316 wetted parts. • Sturdy frame for bench mounting. • Non-stainless steel external parts coated with a two-part acrylic urethane enamel coating. • Easy to disassemble and clean. AVAILABLE OPTIONS: • Additional shaft mounted propellers. • Variety of rotor shaft bushing materials. • Temperature probe with beaker clip. Temperature is displayed on the digital readout. • Vessel/Beaker clamp attachment. • Optional voltages: 190 - 230 V, 50/60 Hz. • Hastelloy product contact surfaces. Overall Raised Height Overall Lowered Height AVAILABLE MIXING ATTACHMENTS: • HSM Attachment: High Shear Rotor/Stator attachment complete with disintegrating, slotted, and fine screen stator heads. Attachment is equipped with TEFLON® bushing. • Inline HSM Attachment: Inline attachment complete with disintegrating, slotted, and fine screen stator heads. • HSD Attachment: High Speed Disperser and propeller mixer attachment. • Micro HSM Attachment: High Shear Micro Rotor/ Stator attachment for batches between 50 mL and 500 mL. Overall Length Overall Width Distance Between Feet Water Capacity

Model HSM-100LCI-T Attachments Micro High Shear Mixer (Micro HSM) High Speed Disperser (HSD) High Shear Mixer (HSM) Round Hole (Disintegrating) Stator Slotted Stator 2” Diameter Disperser Blade Slotted Stator Fine Screen Stator Inline High Shear Mixer (Inline HSM) Quad High Shear Mixer (Quad HSM) Round Hole (Disintegrating) Stator Quad Slotted Stator and Rotor Setup Slotted Stator Fine Screen Stator Lower Flange Diameter (B) in Shaft Length