CDA 10-300 Specifications and Dimensions STANDARD FEATURES Change can design for use with multiple mix vessels. Vertical hydraulic cylinder lift design with controls for lowering agitators to the operating position. Mix vessel includes a flat bottom, mounted on casters. Mix vessel locating and locking device. Wetted parts are stainless steel type 304 with a mill finish. Non-stainless steel components are finished with a durable twocomponent paint. Two independently driven agitators including an Anchor and a High Speed Disperser. Drive motors are explosion proof induction motors. Explosion proof safety limit switch to prevent operation of the agitator drives when the mix can is removed or the agitators are raised from the mixing position. OPTIONAL FEATURES Vacuum and/or internal pressure designs. Sight ports, inlet and outlet nozzles and flush tank discharge valves are available. Temperature probes, pressure transducers, and other batch sensors can be included. Mix vessels can be jacketed for heating/cooling. Control systems are available including variable speed systems and PLC based controllers. Complete systems can include controls, vacuum pump, heater/chiller and other auxiliary equipment. Working Full Capacity Capacity Anchor Speed Disperser Speed Vessel Depth Charles Ross & Son Company P.O.Box 12308, 710 Old Willets Path, Hauppauge, NY 11788 - Tel: 1-631-234-0500 - Fax: 1-631-234-0691 Website: www.mixers.com - Email: [email protected]