42N
42N
- Capacity ranges from 1/2 to 1000 cubic feet.
- Constructed with stainless steel type 304 for wetted parts.
- Equipped with a ribbon agitator for center discharge and designed for atmospheric operation.
- Features a 60 grit finish on both interior and exterior stainless steel surfaces.
- Blender cover available in one, two, or three-piece with silicon gaskets.
- Safety limit switches (NEMA 12) prevent operation when the cover is raised.
- Stuffing boxes with easily disassembled split housing and TEFLON® braided packing.
- Manual knife gate discharge valve and non-stainless steel external parts coated with acrylic urethane enamel.
- Operates on a 230/460 volt, 60 Hz, three-phase TEFC motor.
- Mounted on supports providing a discharge clearance of 36 inches.
- Suitable for product densities up to 64 pounds per cubic foot.
- Wetted parts can be made from stainless steel 316, abrasive-resistant carbon steel, or other special alloys.
- Options for paddle or ribbon/paddle agitator and vacuum or internal pressure capability.
- Sanitary finish and construction, with customizable cover openings.
- Various valve options including flush plug, spherical disc, or flush ball valve.
- Higher horsepower and design options for handling higher density materials.
- Explosion-proof or washdown motor, and control options like variable frequency drives.
- Spray nozzles for liquid introduction and lumpbreakers for size reduction.
- Heating or cooling options with dimpled or baffled jacket, thermocouple, and temperature readout.
- Special gasket materials such as Viton and lantern rings for stuffing boxes.
The document provides detailed specifications for various models of the ROSS Model 42N Ribbon Blender, including working and full capacity, motor horsepower, agitator RPM, trough size, overall dimensions, and shipping weight. Models range from 1/2 cubic foot capacity to 1000 cubic feet, with motor horsepower ranging from 0.65 HP to 60 HP, and agitator RPMs decreasing as capacity increases.
Valve Options:- Standard Knife Gate Valve: Dust-tight design.
- Optional Knife Gate Valve: Liquid-tight design.
- Optional Ball Valve: Suitable for vacuum/pressure operation and liquid-solid blending.
- Optional Spherical Valve: Pneumatically operated, minimizes dead space, and provides a large opening.
- Optional Flush Plug Valve: Eliminates dead spots in the blender trough, available in manual or pneumatic design.
Catalog excerpts
ROSS Model 42N Ribbon Blender Specifications and Dimensions STANDARD FEATURES: OPTIONAL FEATURES: • 1/2 through 1000 cubic foot capacity. • Wetted parts fabricated from stainless steel 316, abrasive-resistant carbon steel and other special alloys. • Stainless steel type 304 wetted parts. • Ribbon agitator for center discharge. • Designed for atmospheric operation. • 60 grit finish on interior and exterior stainless steel surfaces. • One, two or three-piece blender cover with silicon gaskets. • Paddle or ribbon/paddle agitator. • Vacuum or internal pressure capability. • Sanitary finish and construction. • Cover openings as required. • Flush plug, spherical disc, or flush ball valve. • NEMA 12 safety limit switches prevent operation of the agitator when cover is raised. • Higher horsepower and design options for handling higher density materials. • TEFLON® braided packing. • Control options include variable frequency drives, motor starters and operator stations. • Stuffing boxes with easily disassembled split housing. • Explosion-proof or washdown motor. • Manually operated knife gate discharge valve. • Spray nozzles for liquid introduction. • 230/460 volt, 60 Hz, three phase TEFC motor. • Dimpled or baffled jacket for heating or cooling. • Non-stainless steel external parts coated with a two-part acrylic urethane enamel coating. • Blender is mounted on supports providing a discharge clearance of 36”. • Suitable for product densities up to 64 pounds per cubic foot. • Lumpbreakers for solids or agglomerates size reduction. • Thermocouple and temperature readout. • Special gasket materials such as
Open the catalog to page 1
ROSS Model 42N Ribbon Blender Specifications and Dimensions Optional Knife Gate Valve - liquid-tight design. Standard Knife Gate Valve dust-tight design. Model Number Working Capacity Full Capacity Trough Size (inches) Optional Flush Plug Valve eliminates dead spots in the blender trough; choice of manual or pneumatic design. Overall Dimensions (inches) Optional Spherical Valve pneumatically operated, this design minimizes dead space and provides a large opening. Optional Ball Valve - for vacuum/pressure operation and liquid-solid blending.
Open the catalog to page 2All ROSS Mixers catalogs and technical brochures
42B2 Pages
Ross Motionless Mixers10 Pages
HSM-100LCI-T2 Pages
Vertical Blender2 Pages
DCB1 Page
VCB1 Page
Three Roll Mill1 Page
CDA1 Page
PVM1 Page
Series7002 Pages
Series5001 Page
Series1001 Page
Series4001 Page
Discharge System1 Page
High Viscosity Disperser2 Pages
Ross High Speed Disperser2 Pages
High Shear Mixers16 Pages
Blenders12 Pages
Mixing/Dispersion Equipment4 Pages
- Vessel
- Dynamic agitator
- Batch agitator
- Grinding mill
- Drying system
- Metal tank
- Liquid homogenizer
- Stainless steel vessel
- Agitator for the food industry
- Vertical homogenizer
- Homogenizer for the chemical industry
- Stainless steel homogenizer
- Vertical tank
- In-line mixer
- Solid mixer
- Horizontal lump breaker
- Solid/liquid agitator
- Horizontal tank container
- Powder kneader
- Horizontal kneader