5/2 Valves - Single Solenoid Pilot ISO Avg. Port Valve Model Weight Size Cv Size Number kg The W65 Series has a base electrical connector which eliminates the need to disconnect wires to remove the valve. This eliminates dropcords, simplifies maintenance and connection to Serial Data Communication systems. For more information, request Bulletin 379B. 5/2 Valves - Double Solenoid Pilot ISO Avg. Port Valve Model Weight Size Cv Size Number kg 3 3.4 G 1/2 - G 3/4 W6576A4407 1.9 5/3 Valves - Double Solenoid Pilot ISO Avg. Port Valve Model Number Weight Size Cv_Size Power Center Closed Center Open Center kg CLOSED CENTER OPEN CENTER STANDARD SPECIFICATIONS: For valves on this page. Solenoids: Rated for continuous duty. Standard voltages 100-110 volts 50 Hz; 100-120 volts 60 Hz; 24, 110 volts d.c. Power Consumption: Each solenoid. 6.5 VA holding on 50 or 60 Hz; 3.5 watts on d.c. (at 10 bar). Ambient Temperature: 4° to 50°C. Media Temperature: 4° to 80°C. Flow Media: Filtered air. 5 micron recommended. Inlet Pressure: Standard- Size 1: 2-10 bar, Size 2: 1-10 bar, Size 3: 1-10 bar. All sizes available up to 16 bar. Pilot Supply: Internal/external supply selected automatically. Required pressure at least 2 bar.

5/2 Valves - Single Remote Pressure Control Spring Return ISO Avg. Port Valve Model Weight Size Cv Size Number* kg * Valve dimensions shown below. 5/2 Valves - Double Remote Pressure Momentary Control ISO Avg. Port Valve Model Weight Size Cv Size Number* kg *Valve dimensions shown below. 5/3 Valves - Double Remote Pressure Control ISO Avg. Port Valve Model Number* Weight Size Cv Size Power Center Closed Center Open Center kg *Valve dimensions shown below. STANDARD SPECIFICATIONS: For valves on this page. Ambient Temperature: 4° to 80°C. Media Temperature:...

Side and Bottom-Ported Bases ISO Size Assembled manifolds also available. Consult ROSS. www.rosseuropa.com

ISO 1 ISO 2 ISO 3 ISO Size 1 uses mounting Mounting hole Bottom cylinder ports; kit chart for port sizes. End Station Kit NumbersSeries Port Size Part No. ISO 1 * Each end station kit includes left and right end plates, socket head screws, nuts and seals. (2) Pilot ports: 1/8" NPTF (G 1/8) Used for external pilot supply. (3) Side ports, both sides; See end plate kit chart for port sizes. Manifold Station Assembly NumbersSeries Port Size Part No. ISO 1 * Each Manifold Station Assembly includes a manifold assembly, socket head screws, nuts and seals. Conduit port, both sides: (2) Side...

Accessories for Series W65 ISO Valves (5599/II) Interposed Regulators The Interposed Regulator controls the pressure through the base-mounted valve. These interposed devices are “sandwich” style, mounting between a valve and base or manifold. When using an interposed regulator for a Series 65 double solenoid valve, the valve must be externally piloted. ISO-Size 1 (Single) 1 (Double) 2 (Single) 2 (Double) 3 (Single) 3 (Double) Flow Control Kits The interposed flow control independently adjusts the speed of a cylinder’s extend and retract motions. This action is achieved by throttling the flow...