Air Preparation Products • Filters, Regulators, Lubricators • Silencers, Accessorie

For reliable line conditioning, choose ROSS® Almost any pneumatic system will function better, and for a longer time, with properly "conditioned" air. In fact, many system components, such as air cylinders and motors, may be vulnerable to significant damage from dirty or unlubricated air. Other devices require a carefully maintained, consistent line pressure. Yet others will malfunction or fail due to excess water vapor in the line. These are a few of the cases where filters, regulators, lubricators, and other devices are called on to prepare, or "condition", compressed air. All such devices...

The ROSS line of air preparation products is grouped in the following four series of increasing flow capacity: S-Series. For air flows to 850 l/min. Port sizes G 1/8, G 1/4 and G 3/8. M-Series. For air flows to 1900 l/min. Port sizes G 3/8, G 1/2. the lubricator creates a pressure drop in the unit when passing a variable restrictor. A riser tube brings the oil up to a sight-feed dome where it then drips into the air stream. This is a self-adjusting system because the amount of oil added to the air is in proportion to the air flow. The oil flow can be regulated through an adjustment screw. K-Series....

Standard Filters have a 5-micron-rated filter element for particulate and liquid removal. Both automatic and manual drain models are available. Coalescing Filters are designed for low-airflow equipment, e.g., air instruments and air logic circuits that use no more than 200 l/min. Filter elements remove 99.98% per cent of oil, and particulates larger than 0.01 microns. Automatic Drain Models Manual Drain Models Metal bowl guard available STANDARD SPECIFICATIONS Ambient/Media Temperature: 0° to 50°C. Pressure Range: 0 to 16 bar. Weight: 0.25 kg.

Ports: G 1/8 to G 3/8 Flow to 850 l/min S-Series Pressure Regulators feature secondary pressure relief and diaphragm design for fast cycling pneumatic valves and cylinders.These units are designed for modular installation, but also have threaded ports for installation with conventional pipe fittings. Port Flow Rating1 Regulated Pressure REGULATORS for Manifold Mounting G 1/4 500 C5212H2322 C5211H2322 STANDARD SPECIFICATIONS Ambient/Media Temperature: 0° to 60°C. Gauge Ports: Front and back; G 1/8 Maximum Inlet Pressure: 16 bar. Weight: 0.3 kg.

S-Series LUBRICATORS Ports: G 1/8 to G 3/8 Flow to 850 l/min Oil mist lubricator with flow compensation (number of oil drops per minute is constant). Oil reservoir can be filled under pressure. Mounting dimension Model Numbers Plastic Metal Bowl** Bowl C5111H1007 C5112H1007 *Recommended flow at p = 6.3 bar and 25 m/s. **Metal bowl guard available. STANDARD SPECIFICATIONS Ambient/Media Temperature: -20° to 50°C. Pressure Range: 0 to 16 bar. Weight: 0.25 kg.

Ports G 1/8 to G 3/8 Flow to 850 l/min STANDARD SPECIFICATIONS Ambient/Media Temperature: 0° to 50°C. Max. Inlet Pressure: 16 bar. Regulated Pressure: 0.5 to 8 bar (for other ranges, contact ROSS). Automatic Drain Manual Drain Port Air Flow Plastic Plastic Metal Size (l/min) Bowl*** Bowl*** Bowl Gauge included. ***Metal bowl guard available. Combination FILTER & REGULATOR (Weight: 0.55 kg) Port Size Automatic Drain Plastic Bowl*** Manual Drain Plastic Metal Bowl*** Bowl Gauge included. ***Metal bowl guard available. Gauge included. ***Metal bowl guard available....

Ports: G 3/8 to G 1/2 Flow to 1900 l/min Standard Filters have a 5-micron-rated filter element for particulate and liquid removal. ROSS strongly recommends to use models with automatic drain as manual draining of the bowl is often overlooked. Automatic Drain Models Manual Drain Models Metal bowl guard available. SPECIFICATIONS Ambient/Media Temperature: 0° to 50°C. Pressure Range: 0 to 16 bar. Weight: 0.55 kg.

M-Series PRESSURE REGULATORS Ports: G 3/8 to G 1/2 Flow to 1900 l/min 58 M-Series Pressure Regulators feature secondary pressure relief and diaphragm design for fast cycling pneumatic valves and cylinders.These units are designed for modular installation, but also have threaded ports for installation with conventional pipe fittings. Two opposite gauge ports G 1/4 48 61.5 *On delivery the plug screw is not assembled. Standard REGULATORS Port Size Installation Instructions for Manifold Mounting REGULATORS for Manifold Mounting G 1/2 SPECIFICATIONS Ambient/Media Temperature: 0° to 60°C. Gauge Ports:...

M-Series LUBRICATORS Ports: G 3/8 to G 1/2 Flow to 1900 l/min Oil mist lubricator with flow compensation (number of oil drops per minute is constant). Oil reservoir can be filled under pressure. Port Size Model Numbers Plastic Bowl** Metal Bowl *Recommended flow at p = 6.3 and 25 m/s. **Metal bowl guard available. SPECIFICATIONS Ambient/Media Temperature: 0° to 50°C. Pressure Range: 0 to 16 bar. Weight: 0.55 kg.

SPECIFICATIONS Ambient/Media Temperature: 0° to 50°C. Maximum Inlet Pressure: 16 bar. Regulated Pressure: 0.5 to 8 bar (for other ranges, contact ROSS). Combination FILTER & REGULATOR (Weight: 1.1 kg)_ Automatic Drain Manual Drain Port Plastic Metal Plastic Metal Size Bowl** Bowl Bowl** Bowl Gauge included. **Metal bowl guard available. Combination FILTER & LUBRICATOR (Weight: 1.1 kg) G 3/8 C5M11H3101 C5M11H3202 C5M11H3301 C5M11H3402 127 207 84 Gauge included. **Metal bowl guard available. Combination FILTER, REGULATOR & LUBRICATOR (Weight: 1.85...

Ports: G 3/4 to G 1 Flow to 11400 l/min Standard Filters have a 5 gm rated filter element for particulate and liquid removal. ROSS strongly recommends to use models with automatic drain, as manual draining of the bowl is often overlooked. These units are designed for modular installation, but also have threaded ports for installation with conventional pipe fittings. Dust Filters feature an extra large filter surface for long service life. They have a 1 gm rated filter element for particulate and liquid removal. It is recommended to use these filter models with air dryers. Submicro Filters have...