Integrated solution serial bus system
4Pages

{{requestButtons}}

Catalog excerpts

Integrated solution serial bus system - 1

and other field input devices. s s Series W66 & W65 ISO valves. valves and other field operating output devices. s change-of-state (COS) connections to maximize performance. s s types with connector choices of 8mm, 12mm or M23. s detection with electronic feedback. > s latching mechanisms eliminating the need for screws. s to add I/O modules without making changes to the control software. s from placing I/O modules in the wrong sequence. > s maximum of 63 I/O modules and up to 264 Inputs and 264 Outputs. > TM 34 > 2007 ROSS CONTROLS ɮ . All Rights Reserved. size="-1">

Open the catalog to page 1
Integrated solution serial bus system - 3

Ƨ DeviceNet > (M18 or M12)RPSSCDM18PA (M18) orRPSSCDM12A (M12)10 to 28.8VDC > ن ControlNetǙRPSSCCNA10 to 28.8VDC > Ƨ Ethernet I/P > RPSSCENA10 to 28.8VDC > ن Profibus-DP > Ǯ RPSSCPBA10 to 28.8VDC > * IP67 Certified Reference the following Documents for Installation Instructions. DeviceNetƙ - A10313, A10311; ControlNet - A10315 Ethernet I/P - A10316; Profibus-DP - A10314 ٧ Requires a RPSST8M23A or RPSSV32A in all manifold assemblies. RPSSV32A is included in factory assembled manifolds and Serial Bus End Plate Kits.EDS and GSD files located at www.rosscontrols.com RPSSCENARPSSCCNA RPSST8M12A...

Open the catalog to page 3
Integrated solution serial bus system - 4

32 Point Module Size 00, 0, 1, 2, & 3RPSSV32A* > ֆ 24 Output Cable Size 00 & 0RPS5624P > ֆ 25 - 32 Output Cable Size 00 & 0RPS5632P > ֆ 24 Output Cable Size 1, 2, & 3RPS4024P > ֆ RPSSV32A RPSSTERM RPSSSE24A 24VDC Field Power ModuleRPSSSE24A24VDC > A Power Extender Module must be used on every 12th Module in an Serial Bus assembly. See www.rosscontrols.comReference Document A10317 and A10311 for configuration instructions. See www.rosscontrols.com Used as the last Terminating Module for a Stand Alone Serial Bus Assembly.A RPSST8M23A must be located in the Serial Bus assembly. * Reference...

Open the catalog to page 4

All ROSS Controls catalogs and technical brochures

  1. safety product

    32 Pages

  2. DM2

    4 Pages

  3. MD3

    16 Pages

  4. CM series

    4 Pages

  5. DM2 Series D

    16 Pages

  6. W60

    4 Pages

  7. foot valves

    1 Pages

  8. manual valve

    12 Pages

  9. safety valve

    13 Pages

  10. FRL ROSS

    12 Pages

  11. poppet valve

    16 Pages

  12. TSSA

    48 Pages

Archived catalogs