TECHNICAL DATASHEET FIBER OPTIC CONTACTS for connectors acc. to DIN EN 60603-2, Type M Description Multimode fiber optic contacts for use in mixed card-edge connectors according to DIN EN 60603-2 Type M etc. In combination with Rosenberger electrical contacts, hybrid connectors can be build up. The contacts are installed in the cavities by a snap-in mechanism. An extraction tool is required for removal. Materials Ferrule: body: ceramic or metal metal (ARCAP) Fiber types multimode: Insertion loss multimode, typ.: POF, typ.: Number of mating cycles 500* Temperature: Storage: Opteration: Cable types ∅ 0,9 mm buffered fiber (with adaptor) ∅ 2.9 mm-simplex cable ∅ 2.2 mm POF cable * dependent on housing system ** dependent on cable type Pin Contact Socket Contact Type Ceramic Ferrule Type Metal Ferrule Extraction tool While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we reserve the right to make changes judged to be necessary. Draft Engineering change number Rosenberger-OSI GmbH & Co. OHG Endorferstr. 6 D-86167 Augsburg www.rosenberger-osi.com