*mydirectindustry

Catalogs
Rosenberger OSI
FIBER-OPTIC CABLES

FIBER-OPTIC CABLES

1 / 11 PagesView full catalog

FIBER-OPTIC CABLES

Product catalog summary

Installation Guidelines:

Fiber-optic cables are designed for indoor use and should be installed in plastic pipes and ducts. They can be used on cable support systems and in raised floors with caution due to their crush sensitivity.
These cables are suitable for distribution racks and active devices.

Flame Retardancy:

The cables are flame-retardant and do not emit corrosive gases, complying with IEC 60754-2 standards.
They have low smoke emission as per IEC 61034-2 and exhibit low fire spreading.

Cable Properties:

The outer sheath is made of Flame Retardant Low Smoke Zero Halogen (FR-LSZH) material.
Non-metallic strain-relief elements enhance tensile strength.
Fibers are designed for on-site connector installation, with standard colors being yellow for SM, orange for MM, and aqua for MM OM3. Other colors are available upon request.

Applications:

Simplex and duplex cables are used for pigtails, patch cords, equipment cords, and floor cabling according to ISO/IEC 11801 and DIN EN 50173-2 standards.
Mini-break-out and break-out cables are used for rack-to-rack and point-to-point connections, and floor cabling as per the same standards.

Technical Data:

Fiber count ranges from 1 to 2, with cable types including Simplex and Duplex.
Cable diameters range from 0.9 mm to 8.1 mm, with weights from 0.37 kg/km to 45 kg/km.
Maximum tensile strength ranges from 5 N to 800 N, and maximum crush resistance from 10 N/cm to 150 N/cm.
Combustion energy ranges from 0.10 MJ/m to 1.68 MJ/m.
Minimum bending radius during installation is between 10 mm and 160 mm, and in operation between 25 mm and 120 mm.
Temperature range for storage and transport is -25°C to +70°C, during installation -5°C to +50°C, and in operation -10°C to +70°C.

Fiber Specifications:

Core diameters for singlemode and multimode fibers are specified, with attenuation and bandwidth-length product values provided for different wavelengths.
Chromatic dispersion and numerical aperture values are also detailed.

Ordering Information:

Part numbers are provided for various cable configurations, with additional types available on request.

Technical Data Sheets Summary for Optical Fibers:

1. Optical Fiber OM2G5-B:

Design: Multimode optical fiber G50/125 µm, compliant with CCITT Rec. G. 651 and IEC 60793-2-10 type 1Aa.
Geometrical Properties: Core concentricity error < 5%, coating concentricity error < 1%, core coating eccentricity < 1.5 µm.
Transmission Characteristics: Attenuation at 850 nm is 2.7 dB/km and at 1300 nm is 0.8 dB/km. Bandwidth at 850 nm is 500 MHz x km min.
Link Lengths: 1000BASE-SX (850 nm) min. 525 m, 1000BASE-LX (1300 nm) min. 800 m.

2. Optical Fiber OM2G5-A:

Design: Similar to OM2G5-B with slight variations in bandwidth and link lengths.
Transmission Characteristics: Bandwidth at 850 nm is 600 MHz x km min. and at 1300 nm is 1200 MHz x km min.
Link Lengths: 1000BASE-SX (850 nm) min. 750 m, 1000BASE-LX (1300 nm) min. 2000 m.

3. Optical Fiber OM1G6-B:

Design: Multimode optical fiber G62.5/125 µm, compliant with CCITT Rec. G. 651 and IEC 60793-2-10 type 1Ab.
Transmission Characteristics: Attenuation at 850 nm is 3.2 dB/km and at 1300 nm is 0.9 dB/km. Bandwidth at 850 nm is 250 MHz x km min.
Link Lengths: 1000BASE-SX (850 nm) min. 350 m, 1000BASE-LX (1300 nm) min. 550 m.

4. Optical Fiber OM1G6-A:

Design: Similar to OM1G6-B with slight variations in attenuation and bandwidth.
Transmission Characteristics: Attenuation at 850 nm is 3.0 dB/km and at 1300 nm is 0.8 dB/km. Bandwidth at 850 nm is 300 MHz x km min.
Link Lengths: 1000BASE-SX (850 nm) min. 400 m, 1000BASE-LX (1300 nm) min. 1000 m.

5. Optical Fiber OS1-B:

Design: Singlemode optical fiber E9/125 µm, compliant with CCITT Rec. G. 652 and IEC 60793-2-50 type B1.1.
Transmission Characteristics: Zero dispersion wavelength between 1300 nm-1322 nm, attenuation at 1310 nm is 0.36 dB/km and at 1550 nm is 0.22 dB/km.

Note: All specifications are subject to change by Rosenberger OSI Fiber Optics GmbH & Co. KG.

Catalog excerpts

20 LWL-KABEL FIBER-OPTIC CABLES VERLEGUNG • nur In-Haus • in Kunststoffrohren und Kanälen • bedingt auf Kabeltragsystemen (Quetschgefahr!) • bedingt in Doppelböden (Quetschgefahr!) • in Verteilschränken und Aktivgeräten BRANDVERHALTEN • schwer entflammbar • keine Emission von Korrosionsgasen nach IEC 60754-2 • geringe Rauchgasemission nach IEC 61034-2 • geringe Brandfortleitung KABELEIGENSCHAFTEN • Außenmantel aus FR-LSZH-Material (Flame Retardant Low Smoke Zero Halogen) • erhöhte Zugfestigkeit durch nichtmetallische Zugentlastungselemente • Adern für die direkte Steckermontage vor Ort • Standardfarben: SM = gelb MM = orange MM OM3 = aqua (türkis) andere auf Anfrage LWL-SIMPLEX-, DUPLEX-, MINI-BREAK-OUT-, BREAK-OUT-KABEL gemäß DIN/VDE 0888, IEC 60794-2 ANWENDUNGSBEREICHE Simplex- und Duplex-Kabel: • Pigtails, Patchkabel und Geräteanschlußkabel • Etagenverkabelung (tertiär: horizontal in Etage = FTTD) gemäß ISO/IEC 11801 und DIN EN 50173-2 Mini-Break-Out und Break-Out-Kabel: • Schrank » Schrank-Verbindungen • Punkt zu Punkt-Verbindungen (Aktiv » Aktiv) • Etagenverkabelung (tertiär: horizontal in Etage = FTTD) gemäß ISO/IEC 11801 und DIN EN 50173-2 Installation • indoor only • in plastic pipes and ducts • conditionally at cable support systems (crush sensitivity!) • conditionally in raised floors (crush sensitivity!) • in distribution racks and active devices Flame retardancy • flame-retardant • no corrosive gas emission acc. to IEC 60754-2 • low smoke emission acc. to IEC 61034-2 • low fire spreading Properties • outer sheath made of FR-LSZH-material (Flame Retardant Low Smoke Zero Halogen) • increased tensile strength by use of non-metallic strain-relief elements • fibers to install connectors on site • standard colors: SM = yellow MM = orange MM OM3 = aqua (turquoise) others on request FIBER-OPTIC SIMPLEX, DUPLEX, MINIBREAK- OUT, BREAK-OUT CABLES acc. to DIN/VDE 0888, IEC 60794-2 Applications Simplex and duplex cables: • pigtails, patch cords and equipment cords • floor cabling (tertiary: horizontal in floor = FTTD) acc. to ISO/IEC 11801 and DIN EN 50173-2 Mini-break-out and break-out cables: • rack-to-rack connections • point -to-point connections (active » active) • floor cabling (tertiary: horizontal in floor = FTTD) acc. to ISO/IEC 11801 and DIN EN 50173-2

Open the catalog to page 1

Technische Daten und Bestellnummern für Mini-Break-Out- und Break-Out-Kabel auf Anfrage. Technical data and part numbers for mini-break-out and break-out cables on request. * Angabe unter Vorbehalt, Prüfungen waren bei Redaktionsschluß noch nicht abgeschlossen, bei Interesse bitte Stand erfragen. * Specification under reserve, tests haven‘t been finished at editorial deadline, if you are interested please ask for the status. 22 LWL-KABEL FIBER-OPTIC CABLES LWL-SIMPLEX-, DUPLEX-, MINI-BREAK-OUT-, BREAK-OUT-KABEL FIBER-OPTIC SIMPLEX, DUPLEX, MINI-BREAK-OUT, BREAK-OUT CABLES TECHNISCHE DATEN - technical...

Open the catalog to page 3

11 FIBER-OPTIC CABLES LWL-KABEL OSI-Type OS1-B OM2 G5-A OM3 G5-A OM1 G6-A EIGENSCHAFTEN EINHEIT E9/125 G50/125 G50/125 G62,5/125 properties unit Singlemode Multimode Multimode Multimode KERNDURCHMESSER core diameter [ìm] 9,2 + 0,4 50 + 2,5 50 + 2,5 62,5 + 3 MANTELDURCHMESSER cladding diameter [ìm] 125 + 1 125 + 2 125 + 2 125 + 2 DURCHMESSER PRIMÄRCOATING cladding primary coating [ìm] 245 + 5 245 + 10 245 + 10 245 + 10 NUMERISCHE APERTUR numerical aperture – 0,200 + 0,015 0,200 + 0,015 0,275 + 0,015 DÄMPFUNG 850 nm [dB/km] – < 2,7 < 2,5 < 3,0 attenuation 1300 nm [dB/km] < 0,36 (bei 1310 nm) <...

Open the catalog to page 4

Technical Data Sheet Optical fiber OS1-A Doc.-No.:DS_Faser OS1-A_oe_002 Valid since: 2003-02-03 Created: 2003-02-03/by:HJ Changed: 2003-11-26/by:CM Page 1 of 1 Rosenberger OSI Fiber Optics GmbH & Co. KG Phone: +49 821 24 92 40 Optical core Optical cladding Primary coating Singlemode optical fiber F-E9/125 0.38F3.5/0.28H18 Profile view: Design: Optical fibre E9/125 ìm, matched cladding type (conform to CCITT Rec. G. 652 and IEC 60793-2-50 type B1.1) with optical core and optical cladding 125 ìm +/- 1 ìm (on request +/- 1 ìm) Primary acrylate coating, 245 ìm +/- 5 ìm diameter Geometrical properties:...

Open the catalog to page 5

Technical Data Sheet Optical fiber OM3G5-A Doc.-No.:DS_Faser OM3G5-A_oe_001.doc Valid since: 2003-02-03 Created: 2003-02-03/by:HJ Changed: xxxx-xx-xx/by:xx Page 1 of 1 Rosenberger OSI Fiber Optics GmbH & Co. KG Phone: +49 821 24 92 40 Optical core Optical cladding Primary coating Multimode optical fiber F-G50/125 2.5B1500/0.7F500 OM3 Profile view: Design: Optical fibre G50/125 ìm (conform to CCITT Rec. G. 651 and IEC 60793-2-10 type 1Aa) with optical core 50 ìm +/- 2.5 ìm diameter and optical cladding 125 ìm +/- 2 ìm diameter Primary acrylate coating, 245 ìm +/- 10 ìm diameter Geometrical properties:...

Open the catalog to page 6

Technical Data Sheet Optical fiber OM2G5-B Doc.-No.:DS_Faser OM2G5-B_oe_002 Valid since: 2003-02-03 Created: 2003-05-27/by:HJ Changed: 2003-11-26/by:CM Page 1 of 1 Rosenberger OSI Fiber Optics GmbH & Co. KG Phone: +49 821 24 92 40 Optical core Optical cladding Primary coating Multimode optical fiber F-G50/125 2.7B500/0.8F1000 Profile view: Design: Optical fibre G50/125 ìm (conform to CCITT Rec. G. 651 and IEC 60793-2-10 type 1Aa) with optical core 50 ìm +/- 2.5 ìm diameter and optical cladding 125 ìm +/- 2 ìm diameter Primary acrylate coating, 245 ìm +/- 10 ìm diameter Geometrical properties:...

Open the catalog to page 7

Technical Data Sheet Optical fiber OM2G5-A Doc.-No.:DS_Faser OM2G5-A_oe_001.doc Valid since: 2003-02-03 Created: 2003-02-03/by:HJ Changed: xxxx-xx-xx/by:xx Page 1 of 1 Rosenberger OSI Fiber Optics GmbH & Co. KG Phone: +49 821 24 92 40 Optical core Optical cladding Primary coating Multimode optical fiber F-G50/125 2.7B600/0.7F1200 Profile view: Design: Optical fibre G50/125 ìm (conform to CCITT Rec. G. 651 and IEC 60793-2-10 type 1Aa) with optical core 50 ìm +/- 2.5 ìm diameter and optical cladding 125 ìm +/- 2 ìm diameter Primary acrylate coating, 245 ìm +/- 10 ìm diameter Geometrical properties:...

Open the catalog to page 8

All Rosenberger OSI catalogs and technical brochures