OmniDEL Triple
2Pages

OmniDEL Triple OmniDEL Triple binlifts | sideloaders | weighing & ID | data solutions Low-Level Automatic Triple Split Binlift The OmniDEL Triple offers the best available low level bin lift solution for all 70/30 split RCV bodies with a robust build, safe operation and minimal maintenance. The OmniDEL Triple comes configured with additional efficiency saving and safety enhancing features; n Reduced maintenance and increased durability Utilising vibration resistant IP69K automotive components, bearing protection systems & contact-less wear-free angle sensors the OmniDEL Triple offers excellent resistance to high pressure, high temperature cleaning and is designed to cope with the harsh environment of modern bin collections. n Complete spillage protection system The OmniDEL Triple incorporates a unique sonar sensor anti-spillage system & tough extensions to the clamp & hopper plate to provide superb spillage reduction. The Sonar Sensor Anti-Spillage System detects materials that are not fully discharged & automatically shakes the bin until discharged. The extended clamp and hopper plate sections overlap during bin discharge fully covering the bin lift workings and directing any potential spillage into the hopper. n Designed with dynamic weighing and RFID in mind The OmniDEL Triple is designed to allow the integration of weighing and identification systems with ease. Consequently, the binlift has a smooth operation designed to minimise ‘bin bounce’ and a vertical initial lift providing a ‘window’ for ease of data recording. n Lightweight design, heavyweight performance The OmniDEL Triple bin lift weighs in from as little as 800kg. n ’Plug and Play’ wiring connections reduce downtime The OmniDEL Triple’s electrical system is designed to reduce downtime during unlikely repair work. Connections are ‘Plug and Play’ making replacement of defective components or wiring simple and fast. Control boxes & components are easily accessible & an intelligent diagnosis system simplifies finding the root cause of system errors. n Automatic Mode Changeover OmniDEL Triple features automatic cycle mode changeover on its twin chair section. As trade containers are presented, the intelligent control system selects ‘trade’ mode and moves the container catcher bar to the correct position. Both chairs are levelled/raised to the optimum height & the lift engages the container to allow safe, manually controlled lifting. n Rear Protection Device (RPD) Rear underwalk protection as standard ensures compliance with the requirements of EN1501.5. The sensor arrangement employed ensures that bin lift chair movement is frozen if a person (or obstruction) is detected inside the functional working area and the container is above 1000mm. n Single Point Greasing A single point feed greasing system is fitted as standard offering reductions in maintenance times, grease lines are protected from damage and provide grease to all lubrication points. n Smooth, two stage soft lift The OmniDEL has a controlled two speed lifting cycle that offers a safe, smooth and reliable bin pick up that is gentle on bins and reduces mechanical stress on the bin lift system. n Unique Terberg Geometry n Terberg’s unique bin lift geometry gives a container tip angle of 50° ensuring that ‘sticky’ materials are discharged and eliminates bin ‘kick out’ during lifting to re

Single Chair Section Single Twin Chair Section Twin Rear Protection Device (RPD) > Sonar Sensor Anti-Spillage System > Terberg Weighing & RFID preparation > Single point greasing system > CleAN Open CANbus output > Packer Cycle Delay Control (PCDC) > Power source > Electrical connections > quick release couplings (DIN 2353, NW13, NW20) Hydraulic requirement > Waterproof ratings > ideal 40 ltr/min., maximum 60 ltr/min., 180 bar proximity switches/sensors to IP68, ‘Plug and Play’ wiring to IP69K Cycle time > Auto > 2-wheel containers 7.0 secs (+dwell 0.5-1.5) / Manual > 12.0 secs <65 db (A)...