1. Catalogs
  2. Ros Roca
  3. olympus-art

olympus-art

olympus-art

olympus-art

Product catalog summary
Overview: Olympus A T is a waste collection system designed for global markets, offering robust performance and adaptability across various regions including Asia, Africa, GCC, Russia, and LATAM. It is available in two width variants (2.5m and 2.2m) and features a high compaction rate with multiple configurations.
Key Features:
  • High compaction ratios up to 7:1.
  • Robust design with simple relay logic systems for easy maintenance.
  • Large capacity tailgate and hopper with Hardox sides for durability.
  • Hydraulic tank filling point designed to minimize contamination risks.
  • External cylinders to reduce damage risk during operations.
Bin Lift Systems:
  • MOC 500 A T: Manual or optional electric operation, 500kg lifting capacity, designed for EN-840 standard containers.
  • MOC 800 A T: Similar to MOC 500 but with 800kg lifting capacity.
  • TGV A T: Heavy-duty solution for large volume containers, lifting capacity from 120 to 4500 liters.
  • UPC 800 and UPC 500: Electro-hydraulic drive for smooth operation, designed for EN-840 standard containers with lifting capacities of 800kg and 500kg respectively.
Model Specifications:
  • Models range from OLNM-10N to OLNM-27W, with capacities from 10.3m³ to 26.5m³.
  • Compaction mechanism cycle times vary from 18 to 22 seconds.
  • Body weights range from 4817kg to 6216kg depending on the model.
Distribution and Manufacturing:
  • Manufacturing centers located in Spain, UK, and the Netherlands.
  • Authorized distributors across regions including Russia, South Africa, GCC, East Asia, and more.
Additional Information: The document notes that specifications are subject to change and are provided for guidance without contractual obligation.
See more

Catalog excerpts

olympus-art-1

Yterberg rosroca Olympus AflT is specifically developed for operation in countries globally. With proven service in Asia, Africa, GCC, Russia and LATAM markets; coupled with one of our bin lifts Olympus ART changes perceptions of waste collection around the world. Available in 2.5m and 2.2m wide variants, high compaction rate and wide-ranging configurations, Olympus AflT offers exceptional value, solid performance, robust build, and comprehensive aftermarket support via our worldwide distributor network.

 Open the catalog to page 1
olympus-art-2

OLYMPUS A T ADVANTAGES OF OLYMPUS A T • Designed to meet operational requirements around the world. • Wide range of models: available in two widths, two heights and two hopper sizes. • It may be adapted to a wide variety of applications and functions. • For use with our own bin-lifter technology or adapted for other commercial bin-lifters. • Easy maintenance characterised by low maintenance costs. • Robust design: control elements based on Simple Relay Logic systems, with control packing system mechanism accessed from the cab. • High compaction ratios: up to 7:1. • Keel shaped floor for improved...

 Open the catalog to page 2
olympus-art-3

6 High absorption capacity press at the 1 Leachate tankbody bottom of the 2 Tailgate lift cylinders on the hopper roof 3 Full height tailgate seal Keel shaped floor helps leachate flow to drain sump Multi-purpose bin-lifter for bins and containers specially designed for domestic waste collection. It is a vertically-moving bin-lifter with electric/hydraulic drive and proportional hydraulics by means of an electro valve, that allows increased energy efficiency, reduces cycle time, operatation with smooth movement and reduces fatigue to the containers. It has a lifting capacity of 500Kg. Multi-purpose...

 Open the catalog to page 3
olympus-art-4

FEATURES OF OLYMPUS AflT • Specially developed for global markets where EN compliance is not required • Low cost and easy maintenance as standard • Capacities ranging from 10 to 27m3 • The Olympus AF1T range of refuse collection bodies offers a selection of narrow and wide variants • Specially designed for domestic and commercial waste streams • Large hopper resulting in reduced compaction cycles • The Olympus AF1T comes with an automatic packing cycle • Optimum hydraulic performance at low engine speed-less fuel and less heat • Optional in-cab control system for body discharge and compaction...

 Open the catalog to page 4
olympus-art-5

WIDE MODEL Recommended Wheelbase: 1st to 2nd axle (Approx. mm) Body useful capacity (m3) Body Weight (Open Back) (Kg) Maximum external Width (mm) Tailgate internal width without lifter (mm) Compaction mechanism cycle time (s) NOTE: This document and the information or advice given to the customer is merely for guidance and does not constitute any contractual obligation. Nor can any obligation, guarantees or responsibility be taken from it on the part of the company. All specifications are subject to manufacturers tolerances. An allowance of +/- 2% should be made for all weights. Additional equipment...

 Open the catalog to page 5
olympus-art-6

# TRRG headquarters, Warwick (UK) • Production, Sales & Service subsidiaries MANUFACTURING CENTRES ROS ROCA SA Tarrega, Spain AUTHORISED DISTRIBUTORS # Sales and Service subsidiaries # Authorised distributors • Direct sales DENNIS EAGLE Ltd. Warwick, UK TERBERG MACHINES BV IJsselstein, The Netherlands EASTERN Russia Merkator International LLC Moscow merkatorgroup.ru AFRICA South Africa TFM Holdings Olifantsfontein tfm.co.za GCC Oman Excel Industry Co. LLC Ajman excel-uae.com United Arab Emirates Excel Industry Co. LLC Ajman excel-uae.com EAST ASIA Hong Kong MAN Truck & Bus Hong Kong Ltd 8520...

 Open the catalog to page 6

All Ros Roca catalogs and technical brochures

  1. CONTAINERS

    4  Pages

  2. OmniDEL 50/50

    2  Pages

  3. OLYMPUS

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.