- Catalogs
- Ropeblock B.V
- SHORT BOW SOCKETS
SHORT BOW SOCKETS
1 / 1 PageView full catalog
SHORT BOW SOCKETS
Product catalog summary
Product Specifications:
The document provides specifications for a series of Short Bow Sockets (SBS) made from quenched and tempered cast steel. Each model is listed with its model number, Minimum Breaking Load (MBL) in metric tons, suitable wire diameter in millimeters and inches, and various dimensions (A, B, C, øH, K, TA, TL) in millimeters. The weight of each model in kilograms is also provided.
Finish and Certification:
The standard finish for these sockets is blue, with an option for hot-dipped galvanization. Each socket comes with an EN 10204-2.1 declaration of conformity and an EN 10204-3.1 material certificate. A 2006/42/EC declaration can be provided where applicable.
Dimensional Tolerances:
Tolerances vary based on manufacturing techniques, differing between machined components (pins) and cast components (socket bodies and wedges). Surface finishes like galvanizing or painting may affect overall thickness and fork distance.
Recommendations:
For detailed dimensional tolerance information, contact Ropeblock for guidance.
Safety Information:
A warning is included to refer to the company's warning and safety information.
The document provides specifications for a series of Short Bow Sockets (SBS) made from quenched and tempered cast steel. Each model is listed with its model number, Minimum Breaking Load (MBL) in metric tons, suitable wire diameter in millimeters and inches, and various dimensions (A, B, C, øH, K, TA, TL) in millimeters. The weight of each model in kilograms is also provided.
Finish and Certification:
The standard finish for these sockets is blue, with an option for hot-dipped galvanization. Each socket comes with an EN 10204-2.1 declaration of conformity and an EN 10204-3.1 material certificate. A 2006/42/EC declaration can be provided where applicable.
Dimensional Tolerances:
Tolerances vary based on manufacturing techniques, differing between machined components (pins) and cast components (socket bodies and wedges). Surface finishes like galvanizing or painting may affect overall thickness and fork distance.
Recommendations:
For detailed dimensional tolerance information, contact Ropeblock for guidance.
Safety Information:
A warning is included to refer to the company's warning and safety information.
See more
Catalog excerpts
MBL = Minimum Breaking Load The standard finish of our sockets is blue. Hot dipped galvanized is also available. All sockets are provided with an EN 10204-2.1 declaration of conformity, EN 10204-3.1 material certificate and can be provided with a 2006/42/EC declaration where applicable. Dimensional tolerances depend on the manufacturing techniques applied and are different between machined components (pins) and cast components (socket bodies and wedges). Also surface finish e.g. hot dip galvanizing or even paint may add to the overall thickness and fork distance. Please contact Ropeblock for further guidance and a detailed dimensional tolerance sheet.
Open the catalog to page 1All Ropeblock B.V catalogs and technical brochures
CLOSED SPELTER SOCKETS1 Page
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.