- Catalogs
- Ropeblock B.V
- PORT INDUSTRY SOCKETS WITH PIN
PORT INDUSTRY SOCKETS WITH PIN
1 / 1 PageView full catalog
PORT INDUSTRY SOCKETS WITH PIN
Product catalog summary
Specifications:
The document provides specifications for port industry sockets with pin quenched and tempered cast steel. It includes model numbers, minimum breaking loads (MBL) in metric tons, and dimensions for wire diameters ranging from 28-60 mm. Key dimensions include A, B, C, D, øH, øP, T, TL, TB, and W, with weights provided in kilograms.
Procedures and Standards:
The standard finish for sockets is blue, with hot-dipped galvanized options available. All sockets come with an EN 10204-2.1 declaration of conformity and an EN 10204-3.1 material certificate. A 2006/42/EC declaration can be provided where applicable. Dimensional tolerances vary based on manufacturing techniques, with differences between machined components and cast components.
Recommendations:
Surface finishes such as hot dip galvanizing or paint may affect overall thickness and fork distance. It is recommended to contact Ropeblock for detailed guidance and a dimensional tolerance sheet.
Warnings:
The document includes a warning to refer to the company's warning and safety information. Some models are available with a roller.
The document provides specifications for port industry sockets with pin quenched and tempered cast steel. It includes model numbers, minimum breaking loads (MBL) in metric tons, and dimensions for wire diameters ranging from 28-60 mm. Key dimensions include A, B, C, D, øH, øP, T, TL, TB, and W, with weights provided in kilograms.
Procedures and Standards:
The standard finish for sockets is blue, with hot-dipped galvanized options available. All sockets come with an EN 10204-2.1 declaration of conformity and an EN 10204-3.1 material certificate. A 2006/42/EC declaration can be provided where applicable. Dimensional tolerances vary based on manufacturing techniques, with differences between machined components and cast components.
Recommendations:
Surface finishes such as hot dip galvanizing or paint may affect overall thickness and fork distance. It is recommended to contact Ropeblock for detailed guidance and a dimensional tolerance sheet.
Warnings:
The document includes a warning to refer to the company's warning and safety information. Some models are available with a roller.
See more
Catalog excerpts
PORT INDUSTRY SOCKETS WITH PIN AVAILABLE FROM STOCK The standard finish of our sockets is blue. Hot dipped galvanized is also available. All sockets are provided with an EN 10204-2.1 declaration of conformity, EN 10204-3.1 material certificate and can be provided with a 2006/42/EC declaration where applicable. Dimensional tolerances depend on the manufacturing techniques applied and are different between machined components (pins) and cast components (socket bodies and wedges). Also surface finish e.g. hot dip galvanizing or even paint may add to the overall thickness and fork distance. Please contact Ropeblock for further guidance and a detailed dimensional tolerance sheet.
Open the catalog to page 1All Ropeblock B.V catalogs and technical brochures
SHORT BOW SOCKETS1 Page
CLOSED SPELTER SOCKETS1 Page
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.