Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Ropeblock B.V
  3. CLOSED SPELTER SOCKETS
cad

CLOSED SPELTER SOCKETS

CLOSED SPELTER SOCKETS
1 / 1 PageView full catalog

CLOSED SPELTER SOCKETS

Product catalog summary
Overview: The document provides technical specifications for closed spelter sockets made from quenched and tempered cast steel. These sockets are used in conjunction with wire ropes and are available in various models, each with specific dimensions and load capacities.
Specifications: The document lists multiple models (CSS 296 to CSS 270) with details such as Minimum Breaking Load (MBL) in metric tons, wire and strand diameters in both millimeters and inches, and various dimensional measurements (A, B, C, øH, K, T, TA, TL) in millimeters. The weight of each model is also provided in kilograms.
Finishes and Certifications: The standard finish for these sockets is blue, with hot-dipped galvanized options available. Models CSS296 to CSS200 are delivered with a galvanized finish, and other finishes can be requested. All sockets come with an EN 10204-2.1 declaration of conformity and an EN 10204-3.1 material certificate. A 2006/42/EC declaration can be provided where applicable.
Dimensional Tolerances: Tolerances vary based on manufacturing techniques, differing between machined components (pins) and cast components (socket bodies and wedges). Surface finishes like galvanizing or painting may affect overall thickness and fork distance. For detailed tolerance information, contacting Ropeblock is recommended.
Safety Information: The document includes a warning to refer to the company's warning and safety information for proper usage and handling of the sockets.
See more

Catalog excerpts

CLOSED SPELTER SOCKETS-1

CLOSED SPELTER SOCKETS The standard finish of our sockets is blue. Hot dipped galvanized is also available. Socket range CSS296 until CSS200 is delivered with galvanized finish, other finishes are available upon request. All sockets are provided with an EN 10204-2.1 declaration of conformity, EN 10204-3.1 material certificate and can be provided with a 2006/42/EC declaration where applicable. Dimensional tolerances depend on the manufacturing techniques applied and are different between machined components (pins) and cast components (socket bodies and wedges). Also surface finish e.g. hot dip galvanizing or even paint may add to the overall thickness and fork distance. Please contact Ropeblock for further guidance and a detailed dimensional tolerance sheet.

 Open the catalog to page 1

All Ropeblock B.V catalogs and technical brochures

  1. SUPER REEVE CONNECTOR SOCKETS WITH PIN
    SUPER REEVE CONNECTOR SOCKETS WITH PIN

    1  Page

  2. PORT INDUSTRY SOCKETS WITH PIN
    PORT INDUSTRY SOCKETS WITH PIN

    1  Page

  3. OPEN SPELTER SOCKETS WITH PIN
    OPEN SPELTER SOCKETS WITH PIN

    1  Page

  4. SHORT BOW SOCKETS
    SHORT BOW SOCKETS

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.