RTO600ZR565 Open Loop Mode Hall Effect Current Sensor

Product catalog summary

Overview: The RTO600ZR565 series is an open loop Hall Effect current sensor designed by Rongtech Industry (Shanghai) Inc. It provides accurate electronic measurement of DC, AC, or pulsed currents with galvanic isolation between primary and secondary circuits.

Electrical Specifications:

Rated Input (Ipn): Ranges from ±50A to ±600A depending on the model.
Measurement Range (Ip): Up to ±900A for higher models.
Rated Output: ±0.625V ±1% at rated input.
Zero Voltage: 2.5V ±0.5% when Ip=0.
Supply Voltage: +5V ±5%.
Power Consumption: ≤15 mA.
Zero Offset Voltage: ≤±20 mV.
Magnetic Offset Voltage: ±10 to ±15 mV.
Offset Voltage Drift: ≤±1.0 to ≤±0.5 mV/°C.
Output Drift: ≤±1.0 to ≤±0.5 mV/°C.
Linearity: ≤1% Full Scale.
Response Time: ≤3 μS at 50A/μS, 10%-90%.
Galvanic Isolation: 3.3 KV at 50Hz, AC, 1 minute.

Applications:

AC variable speed drives.
Static converters for DC motor drives.
Variable speed drives.
Power supplies for welding applications.
Battery supplied applications.
Uninterruptible Power Supplies (UPS).
Switched Mode Power Supplies (SMPS).

Standards: Complies with UL94-V0, EN60947-1:2004, IEC60950-1:2001, EN50178:1998, SJ 20790-2000.

General Data:

Operating Temperature: -40 to +85 ºC.
Storage Temperature: -40 to +125 ºC.
Mass: Approximately 60g.

Mechanical Dimensions: All dimensions are in mm with a general tolerance of ±1mm.

Directions for Use:

Measure voltage at the output end when current passes through the sensor.
Incorrect wiring may damage the sensor.
Output amplitude can be adjusted as needed.
Custom designs for different rated input currents and output voltages are available.

Characteristics Chart: Includes pulse current signal response characteristics and effects of impulse noise.

Catalog excerpts

RTO600ZR565 Open Loop Mode Hall Effect Current Sensor-1

Rongtech ® The RTO600ZR565 series current sensor is an open loop device based on the measuring principle of the hall effect, with a galvanic isolation between primary and secondary circuit. It provides accurate electronic measurement of DC, AC or pulsed currents. || Electrical data(Ta=25°C+5°C,RL=2KQ ,CL=10000PF)

Open the catalog to page 1

RTO600ZR565 Open Loop Mode Hall Effect Current Sensor-2

Rongtech Industry(ShangHai) Inc., RTO600ZR565 Series Open Loop Mode Hall Effect Current Sensor Mechanical dimension(for reference only) 1. All dimensions are in mm. 2. General tolerance ±1mm 1.When the current will be measured goes through a sensor, the voltage will be measured at the output end. (Note: The false wiring may result in the damage of the sensor) 2.Customs can adjust output amplitude of the sensor by needs. 3. Custom design in the different rated input current and the output voltage are available. Characteristics chart Effects of impulse noise Pulse current signal response characteristic...

Open the catalog to page 2