RTO5000HAX split core current sensor

Product catalog summary

Overview: The RTO5000HAX2 series is an open loop Hall Effect current sensor designed by Rongtech Industry (Shanghai) Inc. It provides accurate electronic measurement of DC, AC, or pulsed currents with galvanic isolation between primary and secondary circuits.

Electrical Specifications:

Rated Input (Ipn): Ranges from ±500A to ±5000A depending on the model.
Measurement Range (Ip): Up to ±10000A for the RTO5000HAX2 model.
Rated Output Voltage: ±2V at Ipn with 0.5% accuracy.
Supply Voltage: ±15V with a tolerance of ±5%.
Power Consumption: +28mA, -15mA.
Offset Voltage: ±20mV at Ip=0.
Linearity: ≤±1% Full Scale (FS).
Response Time: ≤5μs at 50A/μs, 10%-90%.
Bandwidth: DC to 25kHz.
Galvanic Isolation: 5kV at 50Hz/60Hz, AC, 1 minute.
Isolation Resistance: 1000 MΩ at DC 500V.

Applications:

Variable speed drives
Welding machines
Battery supplied applications
Uninterruptible Power Supplies (UPS)
Electrochemical applications

General Data:

Operating Temperature: -40 to +85°C
Storage Temperature: -40 to +125°C
Mass: Approximately 520g

Mechanical Dimensions: All dimensions are in mm with a general tolerance of ±1mm.

Directions for Use:

Ensure correct wiring to avoid sensor damage.
Output amplitude can be adjusted as needed.
Custom designs available for different rated input currents and output voltages.

Standards: Complies with UL94-V0, EN60947-1:2004, IEC60950-1:2001, EN50178:1998, SJ 20790-2000.

Characteristics Chart: Includes pulse current signal response and effects of impulse noise.

Catalog excerpts

Rongtech Industry (ShangHai) Inc., RTO5000HAX2 Series Open Loop Mode Hall Effect Current Sensor Mechanical dimension(for reference only) 1. When the current will be measured goes through a sensor, the voltage will be measured at the output end. (Note: The false wiring may result in the damage of the sensor). 2. Customs can adjust Output amplitude of the sensor by needs. 3. Custom design in the different rated input current and the output voltage available . Standards   Characteristics chart Pulse current signal response characteristic Effects of impulse noise ( Input signal ) ( Output voltage...

Open the catalog to page 2