Rongtech Industry(ShangHai) Inc., RTO200G3 Series Three-phase Open Loop Mode Hall Effect Current Sensor The RTO200G3 series current sensor is a open loop device based on the principle of the hall effect, with a galvanic isolation between primary and secondary circuit, It provides accurate electronic measurement of three phase DC, AC or pulsed currents. Electrical data （Ta=25℃±5℃，RL=2.0KΩ ,CL=10000PF） Type RTO50G3 RTO100G3 RTO150G3 RTO200G3 Unit Parameter Rated input (Ipn) Measure range(Ip) Rated output Supply voltage Consumption current Offset voltage Magnetic offset Offset drift Amplitude drift Response time Galvanic isolation Isolation resistance Applications 1.Variable speed drives 3.Battery supplied applications 5.Electrochemical Standards UL94-V0.;EN60947-1:2004 ;IEC60950-1:2001 General date 2.Welding machine 4.Uninterruptible Power Supplies (UPS) Operating temperature Storage temperature

Rongtech Industry(ShangHai) Inc., RTO200G3 Series Three-phase Open Loop Mode Hall Effect Current Sensor Mechanical dimension(for reference only) Terminal pins Remarks： 1. All dimensions are in mm. 2. General tolerance ±1mm Directions for use 1.It will be in a forward direction when the Ip flows according to the direction of the arrowhead. 2.The primary conductor should be≤120℃. 3.The dynamic performance (di/dt and the response time) is the best when the primary hole is fully filled with the bus bar. 4.when the current will be measured goes through a sensor, the voltage will be measured at the...